Key Programming: Toyota RAV-4 2001-2005
Toyota RAV-4 2001-2005 Key Programming Procedure
The following are the key programming procedures for Toyota RAV-4 for the year 2001 to 2005.
Fits (vehicles without red LED on original remote):
1. Start with key out of ignition, driver’s door is open all others closed and driver’s door is unlocked.
2. Insert key into the ignition (Do NOT Turn) and Pull key out.
3. Perform these steps within 40 seconds.
a. Using the power lock switch on the driver’s door, perform 5 lock/unlock cycles starting with lock. Use an even pace and try to go about one cycle per second (1 Cycle = 1 lock and 1 unlock).
b. Close, then open driver’s door.
4. Perform these steps within 40 seconds.
a. Using the power lock switch on the driver’s door, perform 5 lock/unlock cycles starting with lock.
Use an even pace and try to go about one cycle per second (1 Cycle = 1 lock and 1 unlock).
b. Insert the key in the ignition cylinder.
c. Turn the ignition to ON (Do NOT Start) then back to OFF once to program remote while retaining the original remote codes. Twice to erase all original codes and add new remote. Three times to check how many remotes are programmed or five times to erase all original codes.
d. Remove the key from the ignition.
5. Within 3 seconds the power door locks should cycle automatically indicating successful entry into programming mode. Return to step 1 if the locks do not cycle at this point.
6. Perform these steps within 40 seconds.
a. Press the lock and unlock buttons on the remote simultaneously for 1 second.
b. Immediately after letting go of the lock and unlock buttons, press the lock button itself and hold for 2 seconds. Within 3 seconds, the door locks should cycle once indicating successful programming. If the door locks do not cycle, or cycle twice. Repeat steps A and B in step 6 as your remote has not been accepted.
c. Repeat steps A and B in step 6 for each new remote.
7. Close driver’s door.
About Toyota RAV-4
Unbeknownst to most automobile buyers, the underbody contains a plethora of vital components that ensure the vehicle operates as smoothly as possible. The underbody shields the car’s interior from direct contact with road debris such as dust, water, chemicals, dirt, and other foreign objects.
Before acquiring the Toyota RAV4 2005 as yours, take the time to engage a reliable mechanic to analyze the vehicle’s underbody for signs of rust and deterioration.
Some individual sellers or dealerships go to great lengths to make the car’s outside dazzling and glossy. The vehicle’s exterior, however, is only the top of the iceberg.
How can you know if the seller or dealership is telling the truth about the car’s low mileage? Examine the vehicle’s pedals. The wear and tear on the rubbers will reveal whether or not the vehicle is used frequently.
Examine every inch of that used Toyota RAV4 if at all possible. Also, examine under the floor mats for any wet or moist patches.
The fuel economy of the 2004-2005 Toyota RAV4 is very impressive for an SUV of its period. The EPA forecasts that front-wheel-drive vehicles will score 21 MPG in the city and 27 MPG on the highway.
The SUV, on the other hand, does not sacrifice a vibrant driving experience for efficiency. The engine was updated during the 2004 Toyota RAV4 facelift, according to Edmunds’ evaluation. This 2.4-liter four-cylinder engine produces 161 horsepower, which is not far behind the 203-hp four-cylinder engine found in the brand-new 2021 Toyota RAV4.
When looking for a used 2004 or 2005 Toyota RAV4, prospective buyers will have a few options. It is available with either a four-speed automatic or a five-speed manual transmission. In addition, some versions come with an available all-wheel-drive system and daytime running lights.
