Key Programming: Toyota Land Cruiser 2004-2007
Toyota Land Cruiser 2004-2007 Key Programming Procedure
The following are the key programming procedures for the year 2004, 2005, 2006 and 2007 Toyota Land Cruiser.
Toyota Land Cruiser 1998-2001
TO DELETE ALL BUT ONE KEY FROM THE UNIT:
1. Depress and release brake and accelerator pedals once, doing both at the same time.
2. Put an existing master key into the ignition. Leave the key in the LOCK position; do not turn it.
3. Press and release the accelerator pedal, six times, within 15 seconds of inserting the key.
4. Within 20 seconds of Step 3, press and release the brake pedal seven times.
5. The dashboard security light will flash. This confirms that all keys (except the one currently being used) have been deleted.
6. Within ten seconds, remove the key from the ignition cylinder. This is now the only key still programmed to work.
ADD KEY:
1. Press and release the brake and accelerator pedals once, doing both at the same time.
2. Put the existing master key into the ignition.
3. Press and release the accelerator pedal five times within 15 seconds.
4. Press and release the brake pedal six times within 20 seconds and remove key.
5. Insert new key into ignition within ten seconds.
6. Press and release the accelerator pedal once within ten seconds.
7. The security light will turn off after 80 seconds. This indicates that the new key is now registered.
8. Remove new key. Press and release the brake pedal once.
Toyota Land Cruiser 2002-2010
Keys can be programmed using the Code-Seeker on most 32 bit systems.
TO DELETE ALL BUT ONE KEY FROM THE UNIT:
1. Simultaneously depress and release brake and accelerator pedals 1 time.
2. Insert an existing master key into the ignition cylinder. Do not turn the key from the OFF(LOCK) position.
3. Within fifteen seconds of inserting the key, depress and release the accelerator pedal six times.
4. Within twenty seconds of completing the above step, depress and release the brake seven times.
5. The security light will flash, indicating all keys other than the one being used have been deleted.
6. Remove the key from the ignition cylinder within ten seconds. It will be the only key still programmed to work.
ADD DUPLICATE KEY:
Requires one working Toyota/Lexus Master key.
1. Make sure all doors and windows are closed.
2. Insert Master key into the ignition cylinder.
3. Cycle the ignition cylinder from ON to OFF five times.
4. Open and close the driver side door six times.
5. Remove the Master key and insert the new duplicate key.
6. TURN THE IGNITION CYLINDER ON.
7. The new key will be registered after 60 seconds. The THEFT light on the dashboard will go out, indicating that the programming has been completed.
About Toyota Land Cruiser
Under the leadership of Sadayoshi Koyari and Tetsuya Tada, a five-year development plan for a replacement to the 100-series platform began in 2002. By 2004, ten years after the 1994 design selection of its predecessor, a final production design for the 2008 J200 had been agreed upon. Between 2004 and early 2007, prototype-related tests lasted over two years. Toyota introduced the revamped Land Cruiser in late 2007. The 200 Series is based on the platform and overall design of the Lexus LX 570. The frame was entirely new, taken from the second-generation Tundra but 20 percent shorter and stronger. The brake rotors and calipers have been increased in size, and the front suspension has been reinforced. Skid plates also protect the underbelly. The roof pillars have been altered to provide additional protection for occupants in the event of a rollover.
The 200 Series received significant criticism for its bland body restyling, with some stating that Toyota ‘overdeveloped’ the Land Cruiser’s historic branded identity in an attempt to integrate the Land Cruiser into modern 21st century mobility and vehicle design.
The car began production in September 2007 and went on sale in September or November of that year, depending on the country. It became available for sale in Venezuela in early November of the same year, going by the local moniker “Roraima” (taken from Mount Roraima).
