Buick Cascada 2016-2019 Tire Pressure Monitoring System TPMS Reset
Easy steps to follow on how to reset the TPMS service maintenance indicator warning light on Buick Cascada from the year 2016 and 2019.
A TPMS Tool, or another properly formatted TPMS scan tool, is required to perform this procedure.
1. Set the parking brake.
2. Turn ignition to the ON/RUN position, with the engine OFF, and lower the driver’s side window.
Note: on vehicles with PUSH-BUTTON IGNITION, press and hold the PUSH-BUTTON
until the vehicle is in ACCESSORY MODE.
3. Press the MENU button, located on the turn signal lever (or the instrument cluster on some models), until VEHICLE INFORMATION MENU is displayed in the Driver Information Center.
4. Once you are in the VEHICLE INFORMATION MENU, use the thumbwheel (or ∧∨ on the turn signal lever) to scroll to the TIRE PRESSURE MENU.
5. Press and hold the SET/CLR button, located at the end of the turn signal lever, to begin the sensor matching (relearn) process. A message asking if you are sure you want to relearn may display.
6. Press the SET/CLR button again to confirm the selection. The horn will sound twice signaling the car is in relearn mode.
7. Starting with the LF tire, use your Tool to scan each sensor in the following order: LF, RF, RR and LR. The horn will chirp after the vehicle has received a signal from each sensor. After activating the LR tire, the horn will chirp twice signifying the relearn is complete.
8. Turn the ignition to the OFF position.
9. Inflate all tires to the pressure listed on the placard.
About Buick Cascada
The Buick Cascada debuted at the 2015 North American International Auto Show in January 2015, and went on sale in the US in January 2016 — as the brand’s first factory convertible since the 1991 Buick Reatta, and first two-door model since the 1999 Buick Riviera. More than 600 changes were necessary to meet U.S. safety and comfort requirements. The Buick was available in two trim levels: 1SV and Premium. The Buick was only available with the 200 hp (149 kW) 1.6 liter inline-four engine, and was not available in Canada. (Source Wiki)