AUDI RS e-tron GT 2022 Wheel Alignment Specifications
Audi RS e-tron GT Wheel Alignment Specifications for 2022 year model
Audi RS e-tron GT Wheel Alignment Specifications for 2022 year model. The Audi RS e-tron GT wheel alignment includes specifications in both millimeters (mm) and degrees. Here are the specifications in table format.
Table 1: Audi RS e-tron GT Alignment Specifications in degrees (°)
Table 2: Audi RS e-tron GT Alignment Specifications in Millimeters (mm)
Alignment Parameters
1. Camber: Camber is the angle of the wheels when viewed from the front or rear of the vehicle. A wheel that is tilted inward has negative camber, while a wheel that is tilted outward has positive camber. Camber can affect tire wear, handling, and steering.
2. Caster: Caster is the angle of the steering axis when viewed from the side of the vehicle. A positive caster angle means that the steering axis tilts towards the rear of the vehicle, while a negative caster angle tilts towards the front. Caster can affect steering stability and the returnability of the steering wheel to center.
3. Toe: Toe refers to the angle at which the front or rear wheels are tilted inward or outward when viewed from above. If the wheels are tilted inward, this is called “toe in,” while if the wheels are tilted outward, this is called “toe out.” Toe can affect tire wear, handling, and steering.
4. Thrust Angle: The thrust angle is the angle between the vehicle’s centerline and the rear axle’s geometric centerline. It is measured by comparing the direction that the rear wheels are pointing to the centerline of the vehicle. The thrust angle can affect vehicle stability and how straight the vehicle drives. A thrust angle that is not perpendicular to the centerline of the vehicle can cause the vehicle to pull to one side.
* Please note that these specifications are for general guidance only, and the specific alignment settings for a particular vehicle may differ depending on factors such as driving conditions and personal preference. It’s always best to consult a professional mechanic or alignment specialist for the most accurate recommendations for your vehicle.
Wheel Alignment Brief Information
Wheel alignment is the process of adjusting the angles of the wheels so that they are perpendicular to the ground and parallel to each other. Proper wheel alignment is important for several reasons, including:
1. Safety: Properly aligned wheels help ensure that a vehicle travels in a straight line and handles properly, reducing the risk of accidents.
2. Tire Wear: Misaligned wheels can cause uneven tire wear, reducing tire life and requiring more frequent replacements.
3. Fuel Efficiency: When wheels are misaligned, the vehicle may have to work harder to maintain speed, which can result in decreased fuel efficiency and increased costs.
4. Ride Comfort: Properly aligned wheels can result in a smoother ride and better handling, improving overall ride comfort.
About Audi RS e-tron GT
The Audi e-tron GT’s all-electric drivetrain is powered by a battery with 84 kWh of net capacity (93.4 kWh of gross capacity) and two electric motors that provide all-wheel drive. The vehicle accelerates from 0 to 100 km/h (0 to 62 mph) in 4.1 seconds, tops out at 245 km/h (152 mph), and has a maximum sustained power output of 350 kW (469 hp), which can be temporarily increased to 390 kW. (523 hp). The vehicle’s official EPA range on a single charge is 383 km (238 mi). The car outperformed its EPA rating in Edmunds tests, achieving 439 km/h (273 mi).
Production at the Böllinger Höfe plant began in 2019 and will begin in December 2020. Unlike the e-tron and e-tron Sportback models, which are manufactured in Belgium, this is the first Audi electric vehicle to be manufactured in Audi’s home country of Germany, at the Heilbronn plant. Audi unveiled the production e-tron GT on February 9, 2021, with sales beginning in March 2021. (Source: Wiki)
