KeyFob RKE Programming Procedure: Mitsubishi Colt 1996-2010
Mitsubishi Colt 1996-2010 KeyFob Remote Keyless Entry Programming Procedure
How to Program Mitsubishi Colt KeyFob Remote Keyless Entry for the year 1996, 2003, 2004 and 2010.
Key Fob Programming Procedure (Remote)
Programming Procedure
Note. If the central locking / alarm system is malfunctioning or a replacement key fob is obtained. The following programming procedure is required to be carried out before the key fob will operate correctly. Maximum of 2 Remotes can be programmed
- Connect a link wire between Pin 4 and Pin 1 on the J1962 Connector
- Close all Doors
- Turn Ignition to ACC position and the back to Off 3 Times with in 10 Seconds
- Doors Should lock then unlock
- Press remote control lock or Unlock button once
- Press remote control lock or Unlock button twice within 10 Seconds
- Doors Should lock then unlock
- Repeat for Second Remote
About Mitsubishi Colt
Also in 2008, a limited version called Colt Ralliart Version-R Special was launched in the Japanese market for a limited number of 300 units. The difference from the usual version is further stiffer continuous seam-welded chassis and a Ralliart muffler. Another 200 units of Version-R Special were launched in 2010.
In Switzerland, presents itself as a sporty top model from 2008 – apart from the former Colt CZT with turbocharged 150 hp (110 kW) – the CZT Ralliart high performance version with 180 hp (130 kW) at 6000 rpm and 245 N⋅m (181 lb⋅ft) at 3500 rpm. The extensive modifications include a lowered ride height, a reinforcement of the rear axle, and a tighter coordination of shock absorbers and springs. Special front and rear spoilers and side skirts provide the appropriate visual appearance. (Source Wiki)
