TPMS Reset-Saab 9-7X 2005-2009 Tire Pressure Sensor

TPMS Reset: Saab 9-7X 2005-2009 Tire Pressure Sensor

Saab 9-7X 2005-2009 Tire Pressure Monitoring System TPMS Reset

Simple to follow procedure on how to reset/relearn the TPMS service maintenance indicator warning light on Saab 9-7X for the year 2005 and 2009.

A TPMS Tool, or another properly formatted TPMS scan tool, is required to perform this procedure.

 

Procedure using a TPMS Tool

Sensor Relearn Procedure:

1. Apply the parking brake.
2. Inflate all tires to pressure listed on tire placard.
3. Turn ignition to the OFF position and press and release brake pedal.
4. Cycle ignition from the OFF to RUN position 3 times, ending in the RUN position.
5. Press and release brake pedal.
6. Turn ignition to OFF position.
7. Cycle ignition from the OFF to RUN position 3 times, ending in the RUN position. The horn will sound once, and the TPMS telltale will blink, once relearn mode is initiated.
8. Select the vehicle make, model and model year in your TPMS Tool
9. Starting with the LF tire, use your TPMS Tool to scan each sensor in the following order: LF, RF, RR, LR (and full size spare if equipped). The horn will sound after each sensor is activated.
10. After relearning the LR tire, the message center will display TRAINING MODE COMPLETE. If the vehicle in not equipped with the message center display, successful completion can be verified by turning the ignition to the OFF position and not hearing the horn sound. If the horn sounds, then the relearn procedure must be repeated.
11. Turn the ignition to the OFF position

 

Procedure using another Properly Formatted TPMS Scan Tool

Sensor Relearn Procedure:

1. Inflate all tires to pressure listed on tire placard.
2. Turn ignition to the OFF position and press and release brake pedal.
3. Cycle ignition from the OFF to RUN position 3 times, ending in the RUN position.
4. Press and release brake pedal.
5. Turn ignition to OFF position.
6. Cycle ignition from the OFF to RUN position 3 times, ending in the RUN position. The horn will sound once, and the TPMS telltale will blink, once relearn mode is initiated.
7. Starting with the LF tire, use your TPMS scan tool to scan each sensor in the following order: LF, RF, RR, LR (and full size spare if equipped). The horn will sound after each sensor is activated.
8. After relearning the LR tire, the message center will display TRAINING MODE COMPLETE. If the vehicle in not equipped with the message center display, successful completion can be verified by turning the ignition to the OFF position and not hearing the horn sound. If the horn sounds, then the relearn procedure must be repeated.
9. Turn the ignition to the OFF position

 

About Saab 9-7X

The 9-7X as well as the other GMT360 midsize SUVs made by GM were not scheduled to be redesigned, updated, or to continue production after the 2009 model year, as well a result of GM closing their Moraine, Ohio assembly plant, which was where the GMT360 SUVs were built on December 23, 2008. As a result of this, the Saab 9-7X was discontinued after the 2009 model year.  (Source Wiki)

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *