TPMS Reset-Mazda 5 2006-2015 Tire Pressure Sensor

TPMS Reset: Mazda 5 2006-2015 Tire Pressure Sensor

Mazda 5 2006-2015 Tire Pressure Monitoring System TPMS Reset

Easy to follow procedure on how to reset/relearn the TPMS service maintenance indicator warning light on Mazda 5 for the year 2006, 2010, 2011, 2012, 2013 and 2015.

No special tools are required to perform this procedure, however a properly formatted TPMS scan tool may expedite the relearn process.

 

Sensor Relearn Procedure without a Scan Tool:

1. Inflate all tires to the pressure listed on the placard.

2. Turn the ignition to the ON position, then the OFF position.

3. With the ignition OFF, wait 15 minutes.

4. Drive the vehicle for at least 10 minutes at a speed of 30 MPH or more for the system to learn the new sensor IDs.

 

Sensor Relearn procedure with a Scan Tool:

1. Inflate all tires to the pressure listed on the placard.

2. Starting with the LF tire, use a properly formatted scan tool to scan each sensor in the following order: LF, RF, RR, LR (and full size spare if equipped).

3. Turn ignition to the ON position.

4. Connect the scan tool to the vehicle’s OBDII Port and upload the sensor IDs.

5. Turn the ignition to the OFF position.

6. Drive the vehicle above 30 MPH, for at least 5 minutes, and monitor the low tire pressure monitor to ensure it does not blink.

 

About Mazda 5

The Mazda Mazda5 (called Premacy in the rest of the world) was a compact MPV until 2005, before becoming a minivan for the 2006 model year (C-class).

The first generation Premacy was built in Japan and exported to Europe and Asia. A rebadged version was sold by Ford in a few Asian markets (including Japan) as the Ford Ixion or Ford MAV. The second generation is sold worldwide as the Mazda5. As of March 31, 2005, 285,258 Premacy and Mazda5 models had been sold worldwide since introduction. (Source Wiki Cars)

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *