TPMS Reset-Lincoln Continental 2017-2019 Tire Pressure Sensor

TPMS Reset: Lincoln Continental 2017-2019 Tire Pressure Sensor

Lincoln Continental 2017-2019 Tire Pressure Monitoring System TPMS Reset

 

Simple to follow procedure on how to reset/relearn the TPMS service maintenance indicator warning light on Lincoln Continental 2017 and 2019.

A TPMS Tool, or another properly formatted TPMS scan tool, is required to perform this procedure.

 

Relearn Procedure for Models WITH STANDARD IGNITION

1. Inflate all tires to pressure listed on vehicle placard.
2. Leave the driver’s door open during the relearn procedure.
3. Turn ignition to OFF position and press and release brake pedal.
4. Cycle ignition from the OFF to RUN position 3 times, ending in the RUN position.
5. Press and release brake pedal.
6. Turn ignition to OFF position.
7. Cycle ignition from the OFF to RUN position 3 times, ending in the RUN position.
8. Horn will sound once, and the TPMS telltale will blink once, indicating train mode is initiated. If equipped with a message center, it will display TRAIN LF TIRE.
9. Starting with the LF tire, use your TPMS Tool to scan each sensor in the following order: LF, RF, RR, LR (and full size spare if equipped). The horn will sound once each sensor has been recognized.
10. After training LR tire, the message center will display TRAINING MODE COMPLETE. If the vehicle is not equipped with the message center display, successful completion can be verified by turning the ignition to the OFF position and not hearing the horn sound. If the horn sounds, then the training procedure must be repeated.
11. Turn ignition to the OFF position

 

Relearn Procedure for Models WITH PUSH-BUTTON IGNITION

NOTE: Some models require the ignition button to be pressed twice, without pressing the brake, to enter the RUN mode (Ignition ON/Engine OFF). If this is the case, then modify steps 4 and 6 as noted.

1. Inflate all tires to pressure listed on vehicle placard.
2. Leave the driver’s door open during the relearn procedure.
3. With the vehicle OFF, press and release the brake pedal.
4. Press the IGNITION BUTTON 5 times (NOTE: 8 times if 2x-to-RUN).
5. Press and release the brake pedal.
6. Press the IGNITION BUTTON 6 times (NOTE: 9 times if 2x-to-RUN).

 

Horn will sound once, and the TPMS telltale will blink once, indicating train mode is initiated. If equipped with a message center, it will display TRAIN LF TIRE.

7. Starting with the LF tire, use your TPMS Tool to scan each sensor in the following order: LF, RF, RR, LR (and full size spare if equipped). The horn will sound once after each sensor has been recognized.
8. After training LR tire, the message center will display TRAINING MODE COMPLETE. If the vehicle is not equipped with the message center display, successful completion can be verified by turning the ignition to the OFF position and not hearing the horn sound. If the horn sounds, then the training procedure must be repeated.
9. Press the IGNITION BUTTON 1 time to turn the vehicle OFF.

 

About Lincoln Continental

For the 2019 model year, 80 examples of the 80th Anniversary Coach Door Edition were produced and sold exclusively in the United States. The first Lincoln vehicle with a base price over $100,000, all coach-door Continentals are Black Label trim with all-wheel drive and the 400 hp 3.0T twin-turbocharged V6 powertrain.

For 2020, approximately 150 non-commemorative versions of the Coach Door Edition were offered. (Source Wiki)

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *