Land Rover LR3 2006-2009 Tire Pressure Monitoring System TPMS Reset
Simple to follow procedure on how to reset/relearn the TPMS service maintenance indicator warning light on Land Rover LR3 for the year 2006 and 2009.
No special tools are required to perform this relearn procedure.
Sensor Relearn Procedure:
1. Inflate all tires to pressure listed on the placard.
2. Vehicle must be parked, with the engine OFF, for at least 15 minutes.
3. After the vehicle has been parked, for at least 15 minutes, drive the vehicle for at least 15 minutes while maintaining a speed of 30 MPH, or more.
4. Park the vehicle for at least 15 minutes to complete the relearn.
5. If the spare tire sensor ID is being programmed, a properly formatted TPMS scan tool is necessary.
-If you are replacing the spare tire sensor a properly formatted OBDII scan tool is necessary. The TPMS Tool will not be able to complete the relearn if a spare tire sensor is present.
This vehicle may have a “Light Load” and “Heavy Load” setting with different required tire pressures that are listed on the door placard sticker. With the engine off and using the steering wheel buttons, select “Vehicle Info” → “Tire Info” → “TPM Load Settings” to adjust.
About Land Rover LR3
On 2 April 2004, Land Rover introduced the Discovery 3, marketed as the LR3 in North America and the Middle East, and had its international debut at the British International Motorshow in May. It retained the key features of the Discovery, such as the stepped roofline and steeply raked windscreen.
The LR3 name was chosen for North American and Middle Eastern markets due to negative quality associations with the Discovery name and (according to Land Rover) a preference in the American market for alpha-numeric model designations – the second generation Freelander was also re-designated for the North American and Middle Eastern market as the LR2. (Source Wiki)