TPMS Reset: KIA Magentis 2008-2010 Tire Pressure Sensor
KIA Magentis 2008-2010 Tire Pressure Monitoring System TPMS Reset
Easy to follow procedure on how to reset/relearn the TPMS service maintenance indicator warning light on KIA Magentis for the year 2008 and 2010.
A TPMS Tool and OBDII Module, or another properly formatted TPMS scan tool, is required to perform this procedure.
Procedure using a TPMS Tool and OBDII Module
Relearn Procedure when Replacing a Sensor
1. Inflate all tires to the pressure listed on the vehicle placard.
2. Select a vehicle make, model and model year, which has OBDII support, in you TPMS Tool.
3. Select OBDII from your TPMS Tool’s menu.
4. Starting with the LF tire, use your TPMS Tool to scan each sensor in the following order: LF, RF, RR, LR (and full size spare if equipped).
5. After all sensor ID’s have been stored, use the TPMS Tool’s ▲ or ▼ button to move the cursor under the letters OBD. Then press the enter button.
6. Turn ignition to the ON position with the engine OFF (not the ACC position).
7. Connect the OBDII Connector to the TPMS Tool then to the vehicle’s OBDII port. Make sure your connection is secure and the green light, on the OBII Module, is on.
8. Select Upload Car IDs, from the Tool’s menu, and upload the sensor IDs.
9. When RELEARN COMPLETE / IDs UPLOADED TO CAR is displayed, the ID’s have been successfully uploaded.
10. Turn the ignition to the OFF position. Re‐scan each sensor.
11. Drive the vehicle above 30mph for at least 10 minutes and monitor the low tire pressure monitor to ensure it does not blink.
Note: These vehicles utilize two types of TPMS; lo‐line and hi‐line. Hi‐line systems show driver individual tire positions and air pressures of all tires. Lo‐line systems do not individual tire positions and only alter that one of the 4 tires is under inflated. Some models switched systems mid‐year, so be aware of the type of TPMS you are servicing.
OBDII Errors
If you see an error on the screen while performing an OBDII Relearn, check to make sure that the vehicle is in the ON position (not ACC). Also make sure all the connections are secure.
Errors E1 and E2 ‐ Reading Communication Errors
Make sure vehicle is ON and not ACC Check for secure connection.
Errors E3 and E6 ‐ Writing Communication Errors
Make sure vehicle is ON and not ACC Check for secure connection.
Error E4 – Wrong Set Error
Many Lexus vehicles can store more than one set of TPMS ID’s in ECU. Toggle the vehicles selected set to the MAIN set. Then retry OBDII Relearn.
Error E5 ‐ Spare Tire Error
If you receive this error, and you did not upload a sensor ID for the spare, then this
vehicle requires a spare. If you did upload a spare, but you received this error,
then the vehicle does not store the ID in the ECU for the spare tire.
Procedure using another Properly Formatted Scan Tool
Relearn Procedure when Replacing a Sensor
1. Inflate all tires to the pressure listed on the vehicle placard.
2. Starting with the LF tire, use the scan tool to scan each sensor in the following order: LF, RF, RR, LR (and full size spare if equipped).
3. Turn ignition to the ON position with the engine OFF (not the ACC position).
4. Connect the scan tool to the OBDII port and upload the sensor IDs.
5. Turn the ignition to the OFF position. Re‐scan each sensor.
6. Drive the vehicle above 30mph for at least 10 minutes and monitor the low tire pressure monitor to ensure it does not blink.
About KIA Magentis
The Kia Magentis is a car produced by Kia Motors. It is the successor of the Kia Clarus, and is based on the Hyundai Sonata’s platform.
The first generation were produced from 2000 to 2006. It is available with a 2.0 litre 4-cylinder petrol engine with 100 kW/136 hp and a 2.5 litre 6-cylinder petrol engine with 124 kW/169 hp.
The second generation were launched in 2006. It were until 2009 available with 2.0 and 2.4 litre 4-cylinder petrol engines with 106 kW/144 hp and 120 kW/163 hp respectively, a 2.7 litre 6-cylinder petrol engine with 139 kW/189 hp and a 2.0 litre 4-cylinder turbo diesel engine with 103 kW/140 hp.
In 2009, the Magentis received a facelift. The engines available are now 2.0 and 2.4 litre 4-cylinder petrol engines with 121 kW/164 hp and 130 kW/175 hp respectively, a 2.7 litre 6-cylinder petrol engine with 142 kW/193 hp and a 2.0 litre 4-cylinder turbo diesel engine with 110 kW/150 hp.
In some counties, the first generation Magentis is known as Kia Lotze, and the second generation as Kia Optima. (Source Wiki)