counter create hit

TPMS Reset: Infiniti QX56 2004-2014 Tire Pressure Sensor

0
TPMS Reset-Infiniti QX56 2004-2014 Tire Pressure Sensor

Infiniti QX56 2004-2014 Tire Pressure Monitoring System TPMS Reset

Simple to follow procedure on how to reset/relearn the TPMS service maintenance indicator warning light on Infiniti QX56 for the year 2004, 2006, 2007, 2008, 2010, 2011 and 2014.

A TPMS Tool and OBDII Module, or another properly formatted TPMS scan tool, is required to perform this procedure.

Procedure using a TPMS Tool and OBDII Module

Relearn Procedure when Replacing a Sensor

1. Inflate all tires to the pressure listed on the vehicle placard.
2. Select a vehicle make, model and model year, which has OBDII support, in you TPMS Tool .
3. Select OBDII from your TPMS Tool ’s menu.
4. Starting with the LF tire, use your TPMS Tool to scan each sensor in the following order: LF, RF, RR, LR (and full size spare if equipped).
5. After all sensor ID’s have been stored, use the TPMS Tool ’s ▲ or ▼ button to move the cursor under the letters OBD. Then press the enter button.
6. Turn ignition to the ON position with the engine OFF (not the ACC position).
7. Connect the OBDII Connector to the TPMS Tool then to the vehicle’s OBDII port. Make sure your connection is secure and the green light, on the OBII Module, is on.
8. Select Upload Car IDs, from the TPMS Tool ’s menu, and upload the sensor IDs.
9. When RELEARN COMPLETE / IDs UPLOADED TO CAR is displayed, the ID’s have been successfully uploaded.
10. With the ignition still on, re‐scan each sensor.
11. Drive the vehicle above 30mph for at least 10 minutes and monitor the low tire pressure monitor to ensure it does not blink.

OBDII Errors

If you see an error on the screen while performing an OBDII Relearn, check to make sure that the vehicle is in the ON position (not ACC). Also make sure all the connections are secure.

Errors E1 and E2 ‐ Reading Communication Errors
Make sure vehicle is ON and not ACC Check for secure connection.

Errors E3 and E6 ‐ Writing Communication Errors
Make sure vehicle is ON and not ACC Check for secure connection

Error E4 – Wrong Set Error
Many Lexus vehicles can store more than one set of TPMS ID’s in ECU. Toggle the vehicles selected set to the MAIN set. Then retry OBDII Relearn.

Error E5 ‐ Spare Tire Error
If you receive this error, and you did not upload a sensor ID for the spare, then this vehicle requires a spare. If you did upload a spare, but you received this error, then the vehicle does not store the ID in the ECU for the spare tire.

 

Procedure using another Properly Formatted Scan

Relearn Procedure when Replacing a Sensor

1. Inflate all tires to the pressure listed on the vehicle placard.
2. Starting with the LF tire, use the scan tool to scan each sensor in the following order: LF, RF, RR, LR (and full size spare if equipped).
3. Turn ignition to the ON position with the engine OFF (not the ACC position).
4. Connect the scan tool to the OBDII port and upload the sensor IDs.
5. Turn the ignition to the OFF position. Re‐scan each sensor.
6. Drive the vehicle above 30mph for at least 10 minutes and monitor the low tire pressure monitor to ensure it does not blink.

About Infiniti QX56

In 2013 for the 2014 model year, Infiniti renamed their entire product line, so the QX56 was rebadged as the QX80 in April 2014. Coinciding with the renaming, the QX80 arrived at the New York International Auto Show with a mid-generational refresh, receiving new headlights and taillights with new front and rear fascias, restyled bi-xenon HID projector headlamps with LED daytime running lights, front LED turn signals (located on front bumper with new LED fog lights), new wheel designs (including a new 22-inch forged-aluminum version), three new exterior colors, and a number of interior refinements for the 2015 model year.

The new flagship trim level for 2015 is the QX80 Limited which features all the QX80 packages and optional equipment that is available on other QX80 trim levels, while its standard on the new QX80 Limited trim level, standard Intelligent All Wheel Drive (AWD), and restyled LED clear lens taillights instead of the LED red lens taillights, however the QX80 Limited trim level is not available with the second row bench seating which increases the passenger capability from 7 seats to 8 seats. It will still be offered with the same 5.6-liter VK56VD V8 engine. Naoyuki Ohkoshi was responsible for exterior design work on the facelift QX80 in 2012. (Source Wiki)

Leave a Reply

Your email address will not be published. Required fields are marked *

error: Content is protected !!