Honda Crosstour 2010-2015 Tire Pressure Monitoring System TPMS Reset
Easy to follow procedure on how to reset/relearn the TPMS service maintenance indicator warning light on Honda Crosstour for the year 2010 and 2015.
No special tools are required to perform this relearn procedure. A properly formatted TPMS scan tool can be used for an alternate method.
Sensor Relearn Procedure without a properly formatted TPMS scan tool:
Sensor Relearn Procedure without a scan tool
1. Ensure tires are inflated to the pressure indicated on the tire placard.
2. Drive vehicle for at least 15 minutes above 30mph in order for system to learn new sensor IDs.
Sensor Relearn Procedure with a properly formatted TPMS scan tool:
1. Starting with the LF tire, use the scan tool to scan each sensor in the following order: LF, RF, RR, LR & full size spare (if equipped).
2. Turn ignition to the ON position.
3. Connect scan tool to OBDII port and upload sensor IDs.
4. Turn ignition to the OFF position and unplug the scan tool.
5. To turn off the flashing TPMS light, with the engine running, scan each sensor again and drive the vehicle for 10 minutes above 30mph.
About Honda Crosstour
For the 2013 model year, Honda refreshed the Crosstour. A concept vehicle of the Crosstour was unveiled at the New York International Auto Show on April 4, 2012. The revised 2013 Crosstour went on sale on November 20, 2012 with a $500 reduction in price along with increased standard content. The interior was redesigned, with a more powerful and fuel efficient J35Y1 V6 engine coupled to a 6-speed automatic replacing the previous J35Z2 V6 and 5-speed automatic. Fuel economy for V6 models was improved to an EPA-estimated 20/30/23 mpg (city/highway/combined) for front-wheel-drive and 19/28/22 mpg for all-wheel-drive. Inside a 10-way power (2-way lumbar) driver’s seat and auto-dimming rearview mirror also became standard on all trims. (Source Wiki)