GMC Acadia 2017 Tire Pressure Monitoring System TPMS Reset
Easy to follow procedure on how to reset/relearn the TPMS service maintenance indicator warning light on GMC Acadia for the year 2017.
A TPMS Tool, or another properly formatted TPMS scan tool, is required to perform this procedure.
1. Set the parking brake.
2. Turn ignition to the ON/RUN position (engine running).
3. Using the Driver Information Controls (touchpad), on the right side of the steering wheel, select SETTINGS, then DISPLAY OPTIONS, then TIRE PRESSURE to turn on the tire pressure info page.
4. Exit the SETTINGS menu and scroll to the TIRE PRESSURES screen, then hold down the SEL/checkmark button until the horn sounds twice.
5. Starting with the LF tire, use your Tool to scan each sensor in the following order: LF, RF, RR and LR. The horn will chirp, after the vehicle has received a signal from each sensor. After activating the LR tire, the horn will chirp twice signifying the relearn is complete. The TIRE LEARNING ACTIVE message, on the DIC display screen, will go off.
6. Turn the ignition to the OFF position.
7. Inflate all tires to the pressure listed on the placard.
About GMC Acadia
For the 2017 model year, the first-generation Acadia was sold alongside its second-generation replacement, but was renamed the Acadia Limited, much like the Chevrolet Cruze Limited, Chevrolet Malibu Limited, and Chevrolet Impala Limited were also sold alongside their replacements – at least for a single model year – as rental and fleet vehicles.
However, production remained in Lansing, Michigan as the second generation Acadia moved to Spring Hill, Tennessee, the site of the original Saturn plant. With the second-generation Buick Enclave and Chevrolet Traverse making their debuts in 2017 as 2018 models, GMC ended production of the Acadia Limited on March 31, 2017 in order to start production on the Traverse and Enclave. The Acadia Limited carried a base price tag of $44,775 and continued to offer the same features as the 2016 model. (Source Wiki)