TPMS Reset-Fiat 500X 2016-2019 Tire Pressure Sensor

TPMS Reset: Fiat 500X 2016-2019 Tire Pressure Sensor

Fiat 500X 2016-2019 Tire Pressure Monitoring System TPMS Reset

Simple to follow procedure on how to reset/relearn the TPMS service maintenance indicator warning light on Fiat 500X for the year 2016 and 2019.

Sensor Relearn Procedure without a Scan Tool:

1. Inflate all tires to pressure listed on the placard.

2. Turn the ignition to the ON position with the engine OFF (not the ACC position), and roll the driver’s side window down.

3. Let the vehicle sit, for 20 minutes, with the ignition ON. Turn the climate controls/NAV system OFF to limit battery drain.

4. During the 20 minutes, scan each sensor.

5. Drive the vehicle above 15 MPH for at least 20 minutes. All sensor IDs will be memorized automatically.

Sensor Relearn Procedure with a Scan Tool (If Available):

1. Inflate all tires to pressure listed on the placard.

2. Select OBD II (PERFORM RELEARN on the ELITE Tool) from your Tool’s menu.

3. Starting with the LF tire, use your Tool to scan each sensor in the following order: LF, RF, RR and LR (and the full size spare if equipped).

4. After all sensor IDs have been read, turn the ignition to the ON position with the engine OFF (not the ACC position).

5. Connect the OBD II Connector to the Tool then to the vehicle’s OBD II port. Make sure your connection is secure and the green light is on.

6. Select UPLOAD CAR IDS, from the Tool’s menu, and upload the sensor IDs.

7. When RELEARN COMPLETE / IDs UPLOADED TO CAR is displayed, the IDs have been successfully uploaded.

8. With the ignition still in the ON position, re-scan each sensor.

9. Drive the vehicle above 15 MPH, for at least 20 minutes, and monitor the low tire pressure monitor to ensue it does not blink.

About Fiat 500X

The Fiat 500X (Type 334) is a subcompact crossover SUV manufactured and marketed by Stellantis (formerly Fiat Chrysler Automobiles), since its debut at the 2014 Paris Motor Show. Following the 500L, and produced from 2014 for the 2016 model year, the 500X is closely related to the Jeep Renegade. Both are manufactured at FCA’s SATA Plant in Melfi, Italy.

The 500X is based on the Small Wide 4×4 architecture, a platform evolved from the GM Fiat Small platform used for the Fiat Grande Punto and Fiat 500L.

The Fiat 500X is available with several engines with optional all wheel drive with most. At launch, engines available outside of North America included: one gasoline, the turbocharged 1.4 MultiAir2, and two MultiJet turbodiesels displacing 1.6 and 2.0 litres. (Source Wiki)

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *