counter create hit

TPMS Reset: Dodge Journey 2009-2019 Tire Pressure Sensor

TPMS Reset-Dodge Journey 2009-2019 Tire Pressure Sensor

Dodge Journey 2009-2019 Tire Pressure Monitoring System TPMS Reset

Easy to follow procedure on how to reset/relearn the TPMS service maintenance indicator warning light on Dodge Journey for the year 2009, 2010, 2011 and 2019.

Sensor Relearn Procedure without a Scan Tool:

1. Inflate all tires to pressure listed on the placard.

2. Turn the ignition to the ON position with the engine OFF (not the ACC position), and roll the driver’s side window down.

3. Let the vehicle sit, for 20 minutes, with the ignition ON. Turn the climate controls/NAV system OFF to limit battery drain.

4. During the 20 minutes, scan each sensor.

5. Drive the vehicle above 15 MPH for at least 20 minutes. All sensor IDs will be memorized automatically.

Sensor Relearn Procedure with a Scan Tool (If Available):

1. Inflate all tires to pressure listed on the placard.

2. Select OBD II (PERFORM RELEARN on the ELITE Tool) from your Tool’s menu.

3. Starting with the LF tire, use your Tool to scan each sensor in the following order: LF, RF, RR and LR (and the full size spare if equipped).

4. After all sensor IDs have been read, turn the ignition to the ON position with the engine OFF (not the ACC position).

5. Connect the OBD II Connector to the Tool then to the vehicle’s OBD II port. Make sure your connection is secure and the green light is on.

6. Select UPLOAD CAR IDS, from the Tool’s menu, and upload the sensor IDs.

7. When RELEARN COMPLETE / IDs UPLOADED TO CAR is displayed, the IDs have been successfully uploaded.

8. With the ignition still in the ON position, re-scan each sensor.

9. Drive the vehicle above 15 MPH, for at least 20 minutes, and monitor the low tire pressure monitor to ensue it does not blink.

About Dodge Journey

Revisions for the 2011 model-year include modifications to the grille, lower front fascia, redesigned interior, suspension, steering, powertrain, and use of Dodge’s new logo, launched in 2011, as well as LED Taillights. Express and Mainstreet trim levels replace SE and SXT respectively, while Crew and Lux trims are also added to the lineup.

The 2011 Journey received new Uconnect 3 infotainment systems with either 4.3-inch (4.3″) or 8.4-inch (8.4″) LCD color touchscreen displays, and a full-color LCD Electronic Vehicle Information Center (EVIC) in the instrument cluster. The Keyless Enter-‘n’-Go System, with keyless access and push-button start, became standard on all Journey models.

For the 2012 model year, the Journey became Dodge’s smallest SUV after FCA stopped manufacturing the Nitro. SE and SXT trims return for 2012, replacing Express and Mainstreet trims, respectively. An American Value Package (AVP) model is also added for the United States market that is priced below the SE.

For the 2013 model year, Dodge released the Journey Blacktop, with 19-inch gloss black aluminum wheels and center caps, a gloss black grille, gloss black bezel headlamps, gloss black lower front fascia accent and gloss black exterior mirrors.

In 2014, the Journey Crossroad was introduced with chrome accents along the lower part of the body and in the interior, smoked head- and taillights, a black grille, rocker panels, rails for a roof rack, and a skid plate simile at the rear. Chrysler added the revised Dodge logo with two slanted rectangles for the 2013 Model Year. For the 2016 model-year, the Journey’s AVP and Limited trims were discontinued and the Crossroad Plus trim was added and also for the 2017 model-year, the R/T trim is replaced by the GT trim. (Source Wiki)



Leave a Reply

Your email address will not be published. Required fields are marked *

error: Content is protected !!