TPMS Reset-Chrysler Pacifica 2003-2008 Tire Pressure Sensor

TPMS Reset: Chrysler Pacifica 2003-2008 Tire Pressure Sensor

Chrysler Pacifica 2003 – 2008 Tire Pressure Monitoring System TPMS Reset

Easy to follow procedure on how to reset/relearn the TPMS service maintenance indicator warning light on Chrysler Pacifica for the year 2003, 2004, 2005, 2006 and 2008.

Sensor Relearn Procedure without a Scan Tool:

1. Inflate all tires to pressure listed on the placard.

2. Turn the ignition to the ON position with the engine OFF (not the ACC position), and roll the driver’s side window down.

3. Let the vehicle sit, for 20 minutes, with the ignition ON. Turn the climate controls/NAV system OFF to limit battery drain.

4. During the 20 minutes, scan each sensor.

5. Drive the vehicle above 15 MPH for at least 20 minutes. All sensor IDs will be memorized automatically.

Sensor Relearn Procedure with a Scan Tool (If Available):

1. Inflate all tires to pressure listed on the placard.

2. Select OBD II (PERFORM RELEARN on the ELITE Tool) from your Tool’s menu.

3. Starting with the LF tire, use your Tool to scan each sensor in the following order: LF, RF, RR and LR (and the full size spare if equipped).

4. After all sensor IDs have been read, turn the ignition to the ON position with the engine OFF (not the ACC position).

5. Connect the OBD II Connector to the Tool then to the vehicle’s OBD II port. Make sure your connection is secure and the green light is on.

6. Select UPLOAD CAR IDS, from the Tool’s menu, and upload the sensor IDs.

7. When RELEARN COMPLETE / IDs UPLOADED TO CAR is displayed, the IDs have been successfully uploaded.

8. With the ignition still in the ON position, re-scan each sensor.

9. Drive the vehicle above 15 MPH, for at least 20 minutes, and monitor the low tire pressure monitor to ensue it does not blink.

About Chrysler Pacifica

The Chrysler Pacifica is a mid-size crossover produced by Chrysler from 2003 to 2007, for the model years 2004 to 2008.

The Pacifica was the first jointly engineered product of the 1998 DaimlerChrysler “merger of equals.” Chrysler developed the vehicle in 30 months at a cost below $1 billion.The CUV was inspired by the 1999 Chrysler Pacifica and 2000 Chrysler Citadel concept cars. The production model was first introduced at the 2002 New York International Auto Show.

Chrysler marketed the Pacifica as a “sports-tourer,” building the vehicle at the Windsor Assembly Plant, alongside the long-wheelbase minivans from January 2003 through November 2007. The “Pacifica” name was briefly used as a trim package on the Dodge Daytona for 1987–1988 after the Chrysler Laser was discontinued.

In January 2016, the Pacifica name was revived for a 2017 model year minivan, which debuted at the North American International Auto Show as a replacement for the Chrysler Town & Country. (Source Wiki)

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *