TPMS Reset: Chrysler Crossfire 2004 Tire Pressure Sensor

Chrysler Crossfire 2004 Tire Pressure Monitoring System TPMS Reset
Quick to follow procedure on how to reset/relearn the TPMS service maintenance indicator warning light on Chrysler Crossfire for the year 2004.
Sensor Relearn Procedure without a Scan Tool:
1. Inflate all tires to pressure listed on the placard.
2. Turn the ignition to the ON position with the engine OFF (not the ACC position), and roll the driver’s side window down.
3. Let the vehicle sit, for 20 minutes, with the ignition ON. Turn the climate controls/NAV system OFF to limit battery drain.
4. During the 20 minutes, scan each sensor.
5. Drive the vehicle above 15 MPH for at least 20 minutes. All sensor IDs will be memorized automatically.
Sensor Relearn Procedure with a Scan Tool (If Available):
1. Inflate all tires to pressure listed on the placard.
2. Select OBD II (PERFORM RELEARN on the ELITE Tool) from your Tool’s menu.
3. Starting with the LF tire, use your Tool to scan each sensor in the following order: LF, RF, RR and LR (and the full size spare if equipped).
4. After all sensor IDs have been read, turn the ignition to the ON position with the engine OFF (not the ACC position).
5. Connect the OBD II Connector to the Tool then to the vehicle’s OBD II port. Make sure your connection is secure and the green light is on.
6. Select UPLOAD CAR IDS, from the Tool’s menu, and upload the sensor IDs.
7. When RELEARN COMPLETE / IDs UPLOADED TO CAR is displayed, the IDs have been successfully uploaded.
8. With the ignition still in the ON position, re-scan each sensor.
9. Drive the vehicle above 15 MPH, for at least 20 minutes, and monitor the low tire pressure monitor to ensue it does not blink.
About Chrysler Crossfire
The Chrysler Crossfire is a rear-wheel drive, two-seat sports car that was sold by Chrysler and built by Karmann of Germany for the 2004 to 2008 model years.
Developed during the union of Daimler and Chrysler, the two-seater is based on the Mercedes-Benz R170 platform which shares 80% of its components with the first generation SLK. The second generation SLK was built on a new R171 platform starting in the 2005 model year; the R170 platform was essentially handed down to Chrysler for use in building the Crossfire. Having initially arrived in 2001 as a concept car styled by Eric Stoddard, the Chrysler was further refined by Andrew Dyson before production began in 2003 for 2004 model year sales. (Source Wiki)