TPMS Reset-Chrysler 300M 2002-2004 Tire Pressure Sensor

TPMS Reset: Chrysler 300M 2002-2004 Tire Pressure Sensor

Chrysler 300M 2002 – 2004 Tire Pressure Monitoring System TPMS Reset

Easy to follow procedure on how to reset/relearn the TPMS service maintenance indicator warning light on Chrysler 300M for the year 2002 and 2004.

A TPMS Tool, or another properly formatted TPMS scan tool, is required to perform this procedure.

Procedure using a TPMS Tool

Relearn Procedure:

1. Inflate all tires to the pressure listed on the placard.

2. Turn ignition to the ON position with the engine OFF (not the ACC position).

3. Press and release the MENU button on the EVIC until the message “Retrain Tire Sensor‐No” is displayed.

4. Press the STEP button to select YES.

5. Press the MENU button to start the relearn process. The EVIC will display the
message “Train Left Front Tire”.

6. Select the vehicle make, model and model year in your TPMS Tool.

7. Starting with the LF tire, use your TPMS Tool to scan each sensor in the following order: LF, RF, RR, LR (and full size spare if equipped).

8. Once the EVIC display the message “Training Complete”, depress the STEP, C/T, RESET, or MENU, button, to exit the relearn procedure.

9. Turn the ignition to the OFF position.

Procedure using a Relearn Magnet

Relearn Procedure:

1. Inflate all tires to the pressure listed on the placard.

2. Turn ignition to the ON position with the engine OFF (not the ACC position).

3. Press and release the MENU button on the EVIC until the message “Retrain Tire Sensor‐No” is displayed.

4. Press the STEP button to select YES.

5. Press the MENU button to start the relearn process. The EVIC will display the message “Train Left Front Tire”.

6. Starting with the LF tire, place the relearn magnet over the valve stem until the horn sounds.

7. After the horn sounds, proceed as in step 6 to the next 3 sensors in the following order: RF, RR, LR (and full size spare if equipped).

8. Once the EVIC display the message “Training Complete”, depress the STEP, C/T, RESET, or MENU, button, to exit the relearn procedure.

9. Turn the ignition to the OFF position.

 

Procedure using another Properly Formatted Scan Tool

Relearn Procedure:

1. Inflate all tires to the pressure listed on the placard.

2. Turn ignition to the ON position with the engine OFF (not the ACC position).

3. Press and release the MENU button on the EVIC until the message “Retrain Tire Sensor‐No” is displayed.

4. Press the STEP button to select YES.

5. Press the MENU button to start the relearn process. The EVIC will display the message “Train Left Front Tire”.

6. Starting with the LF tire, use your scan tool to scan each sensor in the following order: LF, RF, RR, LR (and full size spare if equipped).

7. Once the EVIC display the message “Training Complete”, depress the STEP, C/T, RESET, or MENU, button, to exit the relearn procedure.

8. Turn the ignition to the OFF position.

 

About Chrysler 300M

The Chrysler 300M is a full-size luxury sedan that was produced by Daimler/Chrysler from 1999 to 2004. It is a front-wheel drive, 255 hp (190 kW; 259 PS) V6 engined car using the Chrysler LH platform. Versus its platform mates, the 300M was roughly 10 inches (254 mm) shorter to make it more easily exportable to Europe. Priced above the Concorde and identically to the LHS, the 300M shared Chrysler’s flagship position with the LHS until the LHS’s discontinuation after 2001, upon which it became Chrysler’s sole flaghip model. (Source Wiki)

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *