TPMS Reset-Chevrolet Traverse 2016-2019 Tire Pressure Sensor

TPMS Reset: Chevrolet Traverse 2016-2019 Tire Pressure Sensor

Chevrolet Traverse 2016 – 2019 Tire Pressure Monitoring System TPMS Reset

Simple to follow procedure on how to reset/relearn the TPMS service maintenance indicator warning light on Chevrolet Traverse for the year 2016, 2017, 2018 and 2019.

A TPMS tool, or another properly formatted TPMS scan tool, is required to perform this procedure.

Procedure using a TPMS tool

Sensor Relearn Procedure with Steering Wheel Buttons:

1. Ensure all tires are inflated to the pressures listed on the tire placard.
2. Turn the ignition switch to the ON position (engine off) and lower the driver side window.
3. Scroll to the Tire Pressure screen using the steering wheel buttons then hold down the checkmark button until the horn sounds.
4. Select the vehicle make, model and model year in your TPMS tool.
5. Starting with the LF tire, use your TPMS tool to scan each sensor in the following order: LF, RF, RR and LR. The horn will chirp, after the vehicle has received a signal from each sensor. After activating the LR tire, the horn will chirp twice signifying the relearn is complete.
6. Turn ignition to the OFF position.

Sensor Relearn Procedure not equipped with Steering Wheel Buttons:

1. Ensure all tires are inflated to the pressures listed on the tire placard.
2. Turn the ignition switch to the ON position (engine off) and lower the driver side window.
3. Press and release the trip odometer button to scroll to the Tire Pressure display.
4. Hold down the trip odometer button for five seconds then press the button again to confirm.
5. Select the vehicle make, model and model year in your TPMS tool.
6. Starting with the LF tire, use your TPMS tool to scan each sensor in the following order: LF, RF, RR and LR. The horn will chirp, after the vehicle has received a signal from each sensor. After activating the LR tire, the horn will chirp twice signifying the relearn is complete.
7. Turn ignition to the OFF position.

Procedure using another Properly Formatted TPMS Scan Tool

Sensor Relearn Procedure with Steering Wheel Buttons:

1. Ensure all tires are inflated to the pressures listed on the tire placard.
2. Turn the ignition switch to the ON position (engine off) and lower the driver side window.
3. Scroll to the Tire Pressure screen using the steering wheel buttons then hold down the checkmark button until the horn sounds.
4. Starting with the LF tire, use a properly formatted TPMS scan tool to scan each sensor in the following order: LF, RF, RR and LR. The horn will chirp, after the vehicle has received a signal from each sensor. After activating the LR tire, the horn will chirp twice signifying the relearn is complete.
5. Turn ignition to the OFF position.

Sensor Relearn Procedure not equipped with Steering Wheel Buttons:

1. Ensure all tires are inflated to the pressures listed on the tire placard.
2. Turn the ignition switch to the ON position (engine off) and lower the driver side window.
3. Press and release the trip odometer button to scroll to the Tire Pressure display.
4. Hold down the trip odometer button for five seconds then press the button again to confirm.
5. Starting with the LF tire, use a properly formatted TPMS scan tool to scan each sensor in the following order: LF, RF, RR and LR. The horn will chirp, after the vehicle has received a signal from each sensor. After activating the LR tire, the horn will chirp twice signifying the relearn is complete.
6. Turn ignition to the OFF position.

 

About Chevrolet Traverse

The 2016 Traverse received minor changes. The trim level were reduced to LS, LT1, LT2, and LTZ. New features include OnStar 4G LTE connectivity with Wi-Fi hotspot, Iridescent Pearl and Mosaic Black Metallic as color palettes, Leather and Driver Confidence Packages for the LT trims, and 20-inch aluminum wheel designs, painted and machined finishes. (Source Wiki)

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *