TPMS Reset-Chevrolet Tahoe 2008-2012 Tire Pressure Sensor

TPMS Reset: Chevrolet Tahoe 2008-2012 Tire Pressure Sensor

Chevrolet Tahoe 2008-2012 Tire Pressure Monitoring System TPMS Reset

Easy to follow procedure on how to reset/relearn the TPMS service maintenance indicator warning light on Chevrolet Tahoe for the year 2008 and 2012.

A TPMS tool, or another properly formatted TPMS scan tool, is required to perform this procedure.

Procedure using a TPMS tool

Sensor Relearn Procedure with Steering Wheel Buttons:

1. Ensure all tires are inflated to the pressures listed on the tire placard.
2. Turn the ignition switch to the ON position (engine off) and lower the driver side window.
3. Scroll to the Tire Pressure screen using the steering wheel buttons then hold down the checkmark button until the horn sounds.
4. Select the vehicle make, model and model year in your TPMS tool.
5. Starting with the LF tire, use your TPMS tool to scan each sensor in the following order: LF, RF, RR and LR. The horn will chirp, after the vehicle has received a signal from each sensor. After activating the LR tire, the horn will chirp twice signifying the relearn is complete.
6. Turn ignition to the OFF position.

Sensor Relearn Procedure not equipped with Steering Wheel Buttons:

1. Ensure all tires are inflated to the pressures listed on the tire placard.
2. Turn the ignition switch to the ON position (engine off) and lower the driver side window.
3. Press and release the trip odometer button to scroll to the Tire Pressure display.
4. Hold down the trip odometer button for five seconds then press the button again to confirm.
5. Select the vehicle make, model and model year in your TPMS tool.
6. Starting with the LF tire, use your TPMS tool to scan each sensor in the following order: LF, RF, RR and LR. The horn will chirp, after the vehicle has received a signal from each sensor. After activating the LR tire, the horn will chirp twice signifying the relearn is complete.
7. Turn ignition to the OFF position.

Procedure using another Properly Formatted TPMS Scan Tool

Sensor Relearn Procedure with Steering Wheel Buttons:

1. Ensure all tires are inflated to the pressures listed on the tire placard.
2. Turn the ignition switch to the ON position (engine off) and lower the driver side window.
3. Scroll to the Tire Pressure screen using the steering wheel buttons then hold down the checkmark button until the horn sounds.
4. Starting with the LF tire, use a properly formatted TPMS scan tool to scan each sensor in the following order: LF, RF, RR and LR. The horn will chirp, after the vehicle has received a signal from each sensor. After activating the LR tire, the horn will chirp twice signifying the relearn is complete.
5. Turn ignition to the OFF position.

Sensor Relearn Procedure not equipped with Steering Wheel Buttons:

1. Ensure all tires are inflated to the pressures listed on the tire placard.
2. Turn the ignition switch to the ON position (engine off) and lower the driver side window.
3. Press and release the trip odometer button to scroll to the Tire Pressure display.
4. Hold down the trip odometer button for five seconds then press the button again to confirm.
5. Starting with the LF tire, use a properly formatted TPMS scan tool to scan each sensor in the following order: LF, RF, RR and LR. The horn will chirp, after the vehicle has received a signal from each sensor. After activating the LR tire, the horn will chirp twice signifying the relearn is complete.
6. Turn ignition to the OFF position.

 

About Chevrolet Tahoe

In 2008, a two mode hybrid was offered with two trim levels, HY1 or HY2. A 332 hp (248 kW) 6.0L Vortec 6000 with a pair of 80-hp, 184 ft.-lb. torque electric motors was offered. It had a 0.36 to 0.34 drag coefficient from upgraded body panels and a 12V/300V battery system. The hybrid models also included 300V Electric AC, 42V power steering, and LED taillights (only an option in 2008-13).

During the 2009 model year, LTZ models had the option of the 405 hp (302 kW) 6.2L Vortec 6200. The option was dropped after only one model year.

2010 models underwent a mild mid-cycle refresh including a slightly raised bumper, removal of the GM “Mark of Excellence” door badge, revised interior door trim, improved side structure, side torso airbags and optional side blind zone alert.

For 2012, the GMC Yukon offered a special Heritage Edition package, featuring unique Heritage Edition exterior badging, embroidered color-keyed carpeted floor mats, embroidered headrests, SLT-2 Equipment Group standard features (such as 10-way memory leather seats and power liftgate), and optional 20-inch wheels. The Heritage Edition added $1,970 to the price of the Yukon and Yukon XL and was offered in three colors, Heritage Blue, White Diamond Tricoat and Onyx Black. (Source Wiki)

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *