TPMS Reset-Chevrolet Equinox 2007 – 2009 Tire Pressure Sensor

TPMS Reset: Chevrolet Equinox 2007 – 2009 Tire Pressure Sensor

Chevrolet Equinox 2007 – 2009 Tire Pressure Monitoring System TPMS Reset

Simple to follow procedure on how to reset/relearn the TPMS service maintenance indicator warning light on Chevrolet Equinox for the year 2007 and 2009.

A TPMS tool, or another properly formatted TPMS scan tool, is required to perform this procedure.

Procedure using a TPMS tool

Relearn Procedure for Models Equipped with Keyless Entry:

1. Set the parking brake.
2. Inflate all tires to the pressure listed on the placard.
3. Turn ignition to the ON/RUN position with the engine OFF (not the ACC position).
4. Using the keyless entry (key fob), press and hold the lock and the unlock buttons simultaneously until the horn sounds. The horn sounds twice to signal the receiver is in relearn mode and TIRE LEARNING ACTIVE message displays on the DIC.
5. Select the vehicle make, model and model year in your TPMS tool.
6. Starting with the LF tire, use your TPMS tool to scan each sensor in the following order: LF, RF, RR and LR. The horn will chirp, after the vehicle has received a signal from each sensor. After activating the LR tire, the horn will chirp twice signifying the relearn is complete.
7. Turn the ignition to the OFF position.

Relearn Procedure for Models Equipped with a Driver’s Information Center (DIC):

1. Inflate all tires to the pressure listed on the placard.
2. Turn ignition to the ON/RUN position with the engine OFF (not the ACC position) and lower the driver’s side window.
3. Press the Vehicle Information button (located to the left or right of the instrument cluster) repeatedly until “LEARN TIRE PRESSURES” is displayed. Then press the checkmark button
4. Select the vehicle make, model and model year in your TPMS tool.
5. Starting with the LF tire, use your TPMS tool to scan each sensor in the following order: LF, RF, RR and LR. The horn will chirp, after the vehicle has received a signal from each sensor. After activating the LR tire, the horn will chirp twice signifying the relearn is complete.
6. Turn the ignition to the OFF position.

Relearn Procedure for Models NOT Equipped with a Keyless Entry or DIC:

1. Inflate all tires to the pressure listed on the placard.
2. Turn ignition to the ON/RUN position with the engine OFF (not the ACC position) and lower the driver’s side window.
3. Press the trip odometer button until “LEARN TIRE PRESSURES” is displayed. Then hold down the trip odometer button until the horn chirps.
4. Select the vehicle make, model and model year in your TPMS tool.
5. Starting with the LF tire, use your TPMS tool to scan each sensor in the following order: LF, RF, RR and LR. The horn will chirp, after the vehicle has received a signal from each sensor. After activating the LR tire, the horn will chirp twice signifying the relearn is complete.
6. Turn the ignition to the OFF position.

Procedure using another Properly Formatted TPMS Scan Tool TPMS tool

Relearn Procedure for Models Equipped with Keyless Entry:

1. Inflate all tires to the pressure listed on the placard.
2. Turn ignition to the ON/RUN position with the engine OFF (not the ACC position).
3. Using the keyless entry (key fob), press and hold the lock and the unlock buttons simultaneously until the horn sounds.
4. Starting with the LF tire, use a properly formatted TPMS scan tool to scan each sensor in the following order: LF, RF, RR and LR. The horn will chirp, after the
vehicle has received a signal from each sensor. After activating the LR tire, the horn will chirp twice signifying the relearn is complete.
5. Turn the ignition to the OFF position.

Relearn Procedure for Models Equipped with a Driver’s Information Center (DIC):

1. Inflate all tires to the pressure listed on the placard.
2. Turn ignition to the ON/RUN position with the engine OFF (not the ACC position) and lower the driver’s side window.
3. Press the Vehicle Information button (located to the left or right of the instrument cluster) repeatedly until “LEARN TIRE PRESSURES” is displayed.
Then press the checkmark button.
4. Starting with the LF tire, use a properly formatted TPMS scan tool to scan each sensor in the following order: LF, RF, RR and LR. The horn will chirp, after the vehicle has received a signal from each sensor. After activating the LR tire, the horn will chirp twice signifying the relearn is complete.
5. Turn the ignition to the OFF position.

Relearn Procedure for Models NOT Equipped with a Keyless Entry or DIC:

1. Inflate all tires to the pressure listed on the placard.
2. Turn ignition to the ON/RUN position with the engine OFF (not the ACC position) and lower the driver’s side window.
3. Press the trip odometer button until “LEARN TIRE PRESSURES” is displayed. Then hold down the trip odometer button until the horn chirps.
4. Starting with the LF tire, use a properly formatted TPMS scan tool to scan each sensor in the following order: LF, RF, RR and LR. The horn will chirp, after the vehicle has received a signal from each sensor. After activating the LR tire, the horn will chirp twice signifying the relearn is complete.
5. Turn the ignition to the OFF position.

 

About Chevrolet Equinox

The Chevrolet Equinox Fuel cell vehicle uses hydrogen for fuel with water as its only exhaust. The Equinox Fuel Cell uses the fourth-generation hydrogen technology found in the Chevrolet Sequel concept, which was unveiled in September 2009. The fuel cell is designed for only 50,000 miles (80,000 km) of driving, but is engineered to be operable in subfreezing temperatures throughout its life. GM states that the Equinox Fuel Cell is about 500 pounds (230 kg) heavier than the original Equinox and has one inch less ground clearance. To reduce weight, it has aluminum doors and a carbon fiber hood. It uses headlights from the Pontiac Torrent.

A dashboard mounted screen calculates the fuel savings to that of a gasoline-powered Equinox. It also includes a kilowatt meter and a fuel cell energy display. The fuel cell has four vapor outlets that replace the exhaust pipe. Three carbon-fiber fuel tanks store up to a maximum of 9.25 pounds (4.2 kg) of gaseous hydrogen at 10,000 psi (70 MPa), and give the Equinox a range of 200 miles (320 km). The Equinox Fuel Cell is certified by the EPA as a zero-emission vehicle (ZEV). GM built 115 Chevrolet Equinox Fuel Cell vehicles and deployed them in 2007–2008 in several target areas including New York and California as part of a comprehensive plan dubbed “Project Driveway”. (Source Wiki)

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *