TPMS Reset-Chevrolet Avalanche 2008 – 2013 Tire Pressure Sensor

TPMS Reset: Chevrolet Avalanche 2008 – 2013 Tire Pressure Sensor

Chevrolet Avalanche 2008 – 2013 Tire Pressure Monitoring System TPMS Reset

Easy to follow procedure on how to reset the TPMS service maintenance indicator warning light on Chevrolet Avalanche for the year 2008 and 2013.

A TPMS tool, or another properly formatted TPMS scan tool, is required to perform this procedure.

Procedure using a TPMS tool

Relearn Procedure for Models Equipped with Keyless Entry:

1. Set the parking brake.
2. Inflate all tires to the pressure listed on the placard.
3. Turn ignition to the ON/RUN position with the engine OFF (not the ACC position).
4. Using the keyless entry (key fob), press and hold the lock and the unlock buttons simultaneously until the horn sounds. The horn sounds twice to signal the
receiver is in relearn mode and TIRE LEARNING ACTIVE message displays on the DIC.
5. Select the vehicle make, model and model year in your TPMS tool.
6. Starting with the LF tire, use your TPMS tool to scan each sensor in the following order: LF, RF, RR and LR. The horn will chirp, after the vehicle has received a
signal from each sensor. After activating the LR tire, the horn will chirp twice signifying the relearn is complete.
7. Turn the ignition to the OFF position.

Relearn Procedure for Models Equipped with a Driver’s Information Center (DIC):

1. Inflate all tires to the pressure listed on the placard.
2. Turn ignition to the ON/RUN position with the engine OFF (not the ACC position) and lower the driver’s side window.
3. Press the Vehicle Information button (located to the left or right of the instrument cluster) repeatedly until “LEARN TIRE PRESSURES” is displayed.
Then press the checkmark button
4. Select the vehicle make, model and model year in your TPMS tool.
5. Starting with the LF tire, use your TPMS tool to scan each sensor in the following order: LF, RF, RR and LR. The horn will chirp, after the vehicle has received a signal from each sensor. After activating the LR tire, the horn will chirp twice signifying the relearn is complete.
6. Turn the ignition to the OFF position.

Relearn Procedure for Models NOT Equipped with a Keyless Entry or DIC:

1. Inflate all tires to the pressure listed on the placard.
2. Turn ignition to the ON/RUN position with the engine OFF (not the ACC position) and lower the driver’s side window.
3. Press the trip odometer button until “LEARN TIRE PRESSURES” is displayed. Then hold down the trip odometer button until the horn chirps.
4. Select the vehicle make, model and model year in your TPMS tool.
5. Starting with the LF tire, use your TPMS tool to scan each sensor in the following order: LF, RF, RR and LR. The horn will chirp, after the vehicle has received a signal from each sensor. After activating the LR tire, the horn will chirp twice signifying the relearn is complete.
6. Turn the ignition to the OFF position.

Procedure using another Properly Formatted TPMS Scan Tool TPMS tool

Relearn Procedure for Models Equipped with Keyless Entry:

1. Inflate all tires to the pressure listed on the placard.
2. Turn ignition to the ON/RUN position with the engine OFF (not the ACC position).
3. Using the keyless entry (key fob), press and hold the lock and the unlock buttons simultaneously until the horn sounds.
4. Starting with the LF tire, use a properly formatted TPMS scan tool to scan each sensor in the following order: LF, RF, RR and LR. The horn will chirp, after the
vehicle has received a signal from each sensor. After activating the LR tire, the horn will chirp twice signifying the relearn is complete.
5. Turn the ignition to the OFF position.

Relearn Procedure for Models Equipped with a Driver’s Information Center (DIC):

1. Inflate all tires to the pressure listed on the placard.
2. Turn ignition to the ON/RUN position with the engine OFF (not the ACC position) and lower the driver’s side window.
3. Press the Vehicle Information button (located to the left or right of the instrument cluster) repeatedly until “LEARN TIRE PRESSURES” is displayed.
Then press the checkmark button.
4. Starting with the LF tire, use a properly formatted TPMS scan tool to scan each sensor in the following order: LF, RF, RR and LR. The horn will chirp, after the
vehicle has received a signal from each sensor. After activating the LR tire, the horn will chirp twice signifying the relearn is complete.
5. Turn the ignition to the OFF position.

Relearn Procedure for Models NOT Equipped with a Keyless Entry or DIC:

1. Inflate all tires to the pressure listed on the placard.
2. Turn ignition to the ON/RUN position with the engine OFF (not the ACC position) and lower the driver’s side window.
3. Press the trip odometer button until “LEARN TIRE PRESSURES” is displayed. Then hold down the trip odometer button until the horn chirps.
4. Starting with the LF tire, use a properly formatted TPMS scan tool to scan each sensor in the following order: LF, RF, RR and LR. The horn will chirp, after the
vehicle has received a signal from each sensor. After activating the LR tire, the horn will chirp twice signifying the relearn is complete.
5. Turn the ignition to the OFF position.

 

About Chevrolet Avalanche

For 2013, all Avalanches, regardless of trim level, featured the Black Diamond Edition Package, which added Black Diamond Edition emblems to the rear pillars, replacing the previous trim level designation emblems, and also adding unique emblems inside the Avalanche commemorating its production from 2002 to 2013. The 2013 Avalanche was produced in limited numbers. Each 2013 Avalanche buyer received a limited-edition coffee table book with photographs of the owner’s 2013 Avalanche, a copy of the window sticker from their vehicle, and a complete history of the Avalanche from 2002 to 2013. The book was shipped to either the dealership or owner’s home after the owner took delivery of their new 2013 Avalanche. In addition, a newly available color, named Fairway Green Metallic, commemorated the last year of production for the Avalanche (2013). (Source Wiki)

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *