TPMS Reset: Cadillac ATS 2016-2017 Tire Pressure Sensor

Cadillac ATS 2016-2017 Tire Pressure Monitoring System TPMS Reset

Simple to follow procedure on how to reset the TPMS service maintenance indicator warning light on Cadillac ATS from the year 2016 and 2017.

A TPMS tool, or another properly formatted TPMS scan tool, is required to perform this procedure.

Procedure using a TPMS tool

Sensor Relearn Procedure with Steering Wheel Buttons:

1. Ensure all tires are inflated to the pressures listed on the tire placard.
2. Turn the ignition switch to the ON position (engine off) and lower the driver side window.
3. Scroll to the Tire Pressure screen using the steering wheel buttons then hold down the checkmark button until the horn sounds.
4. Select the vehicle make, model and model year in your TPMS tool.
5. Starting with the LF tire, use your TPMS tool to scan each sensor in the following order: LF, RF, RR and LR. The horn will chirp, after the vehicle has received a signal from each sensor. After activating the LR tire, the horn will chirp twice signifying the relearn is complete.
6. Turn ignition to the OFF position.

Sensor Relearn Procedure not equipped with Steering Wheel Buttons:

1. Ensure all tires are inflated to the pressures listed on the tire placard.
2. Turn the ignition switch to the ON position (engine off) and lower the driver side window.
3. Press and release the trip odometer button to scroll to the Tire Pressure display.
4. Hold down the trip odometer button for five seconds then press the button again to confirm.
5. Select the vehicle make, model and model year in your TPMS tool.
6. Starting with the LF tire, use your TPMS tool to scan each sensor in the following order: LF, RF, RR and LR. The horn will chirp, after the vehicle has received a
signal from each sensor. After activating the LR tire, the horn will chirp twice signifying the relearn is complete.
7. Turn ignition to the OFF position.

Procedure using another Properly Formatted TPMS Scan Tool

Sensor Relearn Procedure with Steering Wheel Buttons:

1. Ensure all tires are inflated to the pressures listed on the tire placard.
2. Turn the ignition switch to the ON position (engine off) and lower the driver side window.
3. Scroll to the Tire Pressure screen using the steering wheel buttons then hold down the checkmark button until the horn sounds.
4. Starting with the LF tire, use a properly formatted TPMS scan tool to scan each sensor in the following order: LF, RF, RR and LR. The horn will chirp, after the vehicle has received a signal from each sensor. After activating the LR tire, the horn will chirp twice signifying the relearn is complete.
5. Turn ignition to the OFF position.

Sensor Relearn Procedure not equipped with Steering Wheel Buttons:

1. Ensure all tires are inflated to the pressures listed on the tire placard.
2. Turn the ignition switch to the ON position (engine off) and lower the driver side window.
3. Press and release the trip odometer button to scroll to the Tire Pressure display.
4. Hold down the trip odometer button for five seconds then press the button again to confirm.
5. Starting with the LF tire, use a properly formatted TPMS scan tool to scan each sensor in the following order: LF, RF, RR and LR. The horn will chirp, after the
vehicle has received a signal from each sensor. After activating the LR tire, the horn will chirp twice signifying the relearn is complete.
6. Turn ignition to the OFF position.

About Cadillac ATS

From 2013 to 2016, the ATS base engine in the U.S. model was a naturally aspirated 2.5-liter inline-four engine (LCV) that produces 202 hp (151 kW). As of 2017, the base engine is a 2.0-liter turbocharged I4 gasoline engine (LTG) that produces 272 hp (203 kW), which was optional in previous years. A naturally aspirated 3.6-liter V6 gasoline engine (LGX) that produces 335 hp (250 kW) is optional. 2013 to 2015 ATS models had an available 3.6-liter LFX V6 gasoline engine GM has committed to offering a diesel engine for the ATS, but has not specified an availability date. (Source Wiki)