TPMS Reset-BMW X5 2000-2010 Tire Pressure Sensor

TPMS Reset: BMW X5 2000-2010 Tire Pressure Sensor

BMW X5 2000-2010 Tire Pressure Monitoring System TPMS Relearn

Steps that are simple to follow on how to reset the TPMS service maintenance indicator warning light on BMW X5 from the year 2000, 2003, 2007, 2009, 2014, 2017 and 2010.

No special tools are required to perform this relearn procedure.

Relearn Procedure for Models Equipped with iDrive:

1. Inflate all tires to pressure listed on tire placard.
2. Turn the ignition to the ON/RUN position with the engine OFF.
3. Using the iDrive controller, select Settings or Vehicle Info.
4. Select Vehicle, Vehicle/Tires or Vehicle Status.
5. Select TPM, Reset TPM or Preform Reset.
6. Start the engine and select Reset, then Yes.
7. Press media control located on the center console.
8. Vehicle must be driven for up to 10 minutes, at a speed of 25 MPH or more, to complete relearn.

Relearn Procedure for Models NOT Equipped with iDrive:

1. Inflate all tires to pressure listed on tire placard.
2. Start the engine.
3. Move the turn signal toggle switch up or down until the TPMS telltale and REST are displayed.
4. Press the button at the end of the turn signal lever.
5. Press, and hold button, at the end of the turn signal lever until RESETTING or a checkmark is displayed.
6. Vehicle must be driven for up to 20 minutes, at a speed of 20 MPH or more, to complete relearn.

Relearn Procedure for Models NOT Equipped with iDrive (only select models):

1. Inflate all tires to pressure listed on tire placard.
2. Start the engine.
3. Hold down the TPMS Reset button (located under the hazards switch or in front
of the gear selector) until the TPMS light illuminates on the gauge cluster.
4. Vehicle must be driven for up to 20 minutes, at a speed of 20 MPH or more, to complete

 

About BMW X5

The BMW X5 is a mid-size luxury crossover SUV produced by BMW.

The X5 made its debut in 1999 as the E53 model. It was BMW’s first SUV and it also featured all-wheel drive and was available with either manual or automatic transmission. In 2006, the second generation X5 was launched, known internally as the E70. A facelift of the E53, the E70 also featured the torque-split capable xDrive all-wheel drive system mated to an automatic transmission. In 2009, the X5 M performance variant was released as a 2010 model.

BMW branded the X5 as a Sport Activity Vehicle (SAV) rather than an SUV, to emphasize its on-road ability despite its size. The X5 heralded the shift from light truck-based body-on-frame SUVs to crossovers underpinned by unibody car platforms that would come to fruition in the late 2000s. Among German luxury automakers, while the Mercedes-Benz M-Class had beaten the X5 to the market by more than a year, the X5 was the first to use a unibody chassis, whereas the M-Class used body-on-frame construction until its second generation.

X5s are manufactured in Greer, South Carolina at the Spartanburg BMW plant and modified for armoured, security versions in Mexico at the BMW de México Toluca plant. Since July 2009, some assembly operations are also performed in Kaliningrad, Russia by Avtotor.

Starting with the X5, BMW’s “SAV” series has since expanded with derivatives of other BMW number-series models, first in 2003 with the BMW X3 compact luxury crossover, and then in 2008 with the BMW X6 midsize coupe luxury crossover which shares its platform with the X5. (Source Wiki)

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *