TPMS Reset-BMW 4 Series 2014-2017 Tire Pressure Sensor

TPMS Reset: BMW 4 Series 2014-2017 Tire Pressure Sensor

BMW 4 Series 2014-2017 Tire Pressure Monitoring System TPMS Reset

Simple tutorial on how to reset the TPMS service maintenance indicator warning light on BMW 4 Series from the year 2014, 2015 and 2017.

No special tools are required to perform this relearn procedure.

Relearn Procedure for Models Equipped with iDrive:

1. Inflate all tires to pressure listed on tire placard.
2. Turn the ignition to the ON/RUN position with the engine OFF.
3. Using the iDrive controller, select Settings or Vehicle Info.
4. Select Vehicle, Vehicle/Tires or Vehicle Status.
5. Select TPM, Reset TPM or Preform Reset.
6. Start the engine and select Reset, then Yes.
7. Press media control located on the center console.
8. Vehicle must be driven for up to 10 minutes, at a speed of 25 MPH or more, to complete relearn.

Relearn Procedure for Models NOT Equipped with iDrive:

1. Inflate all tires to pressure listed on tire placard.
2. Start the engine.
3. Move the turn signal toggle switch up or down until the TPMS telltale and REST are displayed.
4. Press the button at the end of the turn signal lever.
5. Press, and hold button, at the end of the turn signal lever until RESETTING or a checkmark is displayed.
6. Vehicle must be driven for up to 20 minutes, at a speed of 20 MPH or more, to complete relearn.

Relearn Procedure for Models NOT Equipped with iDrive (only select models):

1. Inflate all tires to pressure listed on tire placard.
2. Start the engine.
3. Hold down the TPMS Reset button (located under the hazards switch or in front
of the gear selector) until the TPMS light illuminates on the gauge cluster.
4. Vehicle must be driven for up to 20 minutes, at a speed of 20 MPH or more, to complete relearn.

 

About BMW 4 Series

The BMW 4 Series is a range of compact executive cars manufactured by BMW since 2013. The 4 Series was created when BMW spun off the 2-door models (coupé and convertible) of the BMW 3 Series into a separate series. The 4 Series is currently in its second generation.

The original 4 Series concept car was unveiled in January 2013 at the North American International Auto Show in Detroit, Michigan. Both generations have been produced in the coupé, convertible and 4-door coupé (“Gran Coupé”) body styles. The engines available for the first generation were turbocharged inline-3, inline-4 and inline-6 engines fueled by petrol or diesel. For the second generation, a plug-in hybrid powertrain was introduced. As per the equivalent 3 Series generations, the 4 Series’ drivetrain layout is rear-wheel drive or all-wheel drive (“xDrive”).

The BMW M4 is the high-performance version of the 4 Series. The first generation of the M4 is called the F82/F83 and uses the same turbocharged inline-six petrol engine as the F80/F81 M3.

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *