Oil Reset Procedure: Jeep Renegade 2014-2021
Oil Reset Procedure for Jeep Renegade 2014-2021
Simple to follow oil reset procedure for Jeep Renegade for the year 2014, 2015, 2016, 2017, 2018, 2019, 2020 and 2021.
Jeep Renegade oil reset procedure for the year 2014 through 2020
1. Close all doors.
2. Set the gear to the PARK position.
3. Turn ignition to RUN position, don’t start the engine.
4. Fully depress the accelerator pedal slowly (5x)FIVE TIMES within 10 seconds.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.
Jeep Renegade oil reset procedure for the year 2015
1. Make sure the gear shifter is set to park, and that the parking brake is engaged.
2. Set the ignition to the ON position, but do not crank the engine.
3. Slowly depress and release the gas pedal three times in succession.
4. Set the ignition to the OFF position, then set it back to the ON position again.
5. Check if the reset oil light has turned off.
Jeep Renegade oil reset procedure for the year 2015 through 2021
1. Turn the ignition switch to the ON position without holding the brake pedal. Do not start the engine.
2. Slowly press the Gas pedal all the way down to the floor three times within ten seconds. (With each press you will see various warning lights disappear on the dashboard, including the oil warning light).
3. Switch the ignition to OFF, then immediately back ON.
Jeep Renegade oil reset procedure for the year 2019
1. Start by turning your ignition to the “ON” position, but don’t start the vehicle engine
2. With the ignition turned to “ON,” fully depress and release the accelerator (gas) pedal three times in a row within 10 seconds
3. Turn the ignition to the “OFF” position
About Jeep Renegade
Stellantis Automobile Company’s Jeep marque is responsible for producing the subcompact crossover SUV known as the Jeep Renegade. At the Geneva Motor Show in March of 2014, it was unveiled to the general public for the first time. Production didn’t begin until late August of that same year. Following in the footsteps of the Compass as Jeep’s second-smallest offering, the Renegade will take its place in the lineup in the year 2022. The FCA Small Wide 4×4 platform, which is also shared with other FCA models, including those from the Fiat and Alfa Romeo brands, serves as the foundation for this vehicle.
The front-wheel drive configuration was the default for the Renegade, but Jeep offers two different four-wheel drive configurations as add-ons to the Selec-Terrain system. These configurations are known as Active Drive I and Active Drive Low.
Seating surfaces can be upholstered in either cloth or leather in the Renegade. It has seating for four people, a rear bench seat that folds into third and second positions, and a front passenger seat that can be folded down to increase the amount of space available for cargo.
In North America, it comes equipped with a standard Uconnect 5.0BT radio that features an AM/FM radio, Sirius XM satellite radio, voice command, a touch screen interface derived from Microsoft, iPod and USB inputs, and a 3.5-millimeter auxiliary audio input jack. Additionally, it has Sirius XM satellite radio. In addition to that, Uconnect Phone will be standard. There will be an option for a rearview backup camera. The UConnect 6.0 radio will be available as an option. It will have all of the capabilities of the UConnect 5.0BT radio, in addition to a touch screen interface developed by BlackBerry (a more compact version of the interface found on the UConnect 8.4A and 8.4AN radios), and navigation system capabilities developed by Garmin.
