Oil Reset Procedure: Cadillac Fleetwood 1991-1996

Oil Reset Procedure for Cadillac Fleetwood 1991-1996
Simple to follow oil reset procedure for Cadillac Fleetwood 1991, 1992, 1993, 1994, 1995 and 1996.
Cadillac Fleetwood oil reset procedure for the year 1993 through 1996.
1. Turn ignition to the “ON” position.
2. Slowly depress accelerator pedal 3 times within 5 seconds.
3. “CHANGE OIL SOON” lamp will flash.
4. Turn ignition off.
5. Start engine.
6. Oil life will display 100%.
With DIC:
1. Turn ignition to the “ON” position.
2. Push info button until “OIL LIFE” is displayed.
3. Press and hold “CLR” or “RESET” button until “100%” is displayed.
With navigation system:
1. With engine running, press “PWR/VOL” button.
2. Press and hold “INFO” until information menu is entered.
3. Select ENGINE OIL LIFE.
4. Press and hold “RESET” button until “100%” is displayed.
Or you can also try this procedure.
1. Turn ignition switch to ON position with engine off
2. Fully depress and release the accelerator pedal 3 times within 5 seconds of turning key
3. Change Oil lamp will flash for 2-10 seconds while it resets
4. Once it stops flashing, the maintenance light reset is complete
5. Turn key to OFF position and then start engine to verify indicator is no longer illuminated
Cadillac Fleetwood oil reset procedure for the year 1991 through 1992.
1. Press RANGE and FUEL USED simultaneously to display “Oil Life Index’
2. Press and hold RANGE and RESET simultaneously for 5 seconds or until the “Change Oil Soon” light flashes
3. The oil life index will no remain displayed
About Cadillac Fleetwood
Cadillac Fleetwood is a model of luxury car that was produced by the Cadillac division of General Motors between the years 1976 and 1996. It was produced during that time period from 1976 to 1996. Beginning in 1935, Cadillac began appending the name “Fleetwood” to the beginning of the model names of several of their automobiles. The wheelbases of Cadillac’s four-door Fleetwoods were typically longer than those of Cadillac’s more popular Series 62 and DeVille models.
Up until 1984, every single car in the Fleetwood series had a rear-wheel drivetrain. Between the years 1985 and 1992, the name Fleetwood was given to a number of new front-wheel drive models that were very similar to the concurrent DeVille models. It was initially known as the Fleetwood Brougham up until the year 1987, and after that, it was referred to simply as the Brougham. Production of the older RWD Fleetwood model continued all the way up until 1992. A model with a longer wheelbase and front-wheel drive was added to the lineup in 1987 under the name Fleetwood 60 Special. This was the first time that name had been used since the 1970 Fleetwood, when it referred to a trim level. A new version of the Fleetwood with rear-wheel drive was unveiled in 1993 and remained in production until 1996.
Before the year 1934, customers could place orders for any Cadillac model to have its body constructed by the General Motors Fleetwood coachbuilding operation, which was located in Fleetwood, Pennsylvania. There, between the years 1935 and 1941, automobiles bearing the Fleetwood brand name were put together there.
Harry Urich founded the Fleetwood Body Company in Fleetwood, Pennsylvania, in the nineteenth century. Henry Fleetwood, Esq. of Penwortham, near Lancaster, England, founded it as a small community of craftsmen (the Fleetwood family flourished in England in the 17th and 18th centuries). By the 1920s, the Fleetwood Body Company had earned a high reputation in automobile circles around the world thanks to the rich traditions of 300 years of coach-building that it applied to its work on cars. Fleetwood built coachwork for a variety of luxury makes until 1924.