KeyFob RKE Programming Procedure: Toyota Landcruiser Amazon

KeyFob RKE Programming Procedure-Toyota Landcruiser Amazon

Toyota Landcruiser Amazon KeyFob Remote Keyless Entry Programming Procedure

 

How to Program Toyota Landcruiser Amazon KeyFob Remote Keyless Entry

 

Key Fob Programming Procedure (Remote)

Remote programming is a manual process for all vehicles supported.
Please follow the procedures set out below to ensure accurate programming of the remotes.

 

Please ensure the following has been carried out before starting:

All Doors are closed
Start the vehicle and then stop the vehicle.
Remove key from the ignition switch.
Open the Drivers door and ensure it is unlocked.

  • Insert key in the ignition for 2 seconds and then remove.
  • Within 40 seconds: Close the driver’s door for 2 seconds and then open.
  • Wait 2 seconds: Close the driver’s door for 2 seconds and then open
  • Insert key in the ignition for 2 seconds and then remove.
  • Within 40 seconds: Close the driver’s door for 2 seconds and then open
  • Wait 2 seconds: Close the driver’s door for 2 seconds and then open
  • Close Drivers Door.

To Program an additional remote whilst retaining all other remotes programmed.

  • Insert Key in the ignition switch and wait 2 seconds
  • Switch ignition on for 2 seconds and then turn off.
  • Remove key
  • System should lock and unlock once.

Note: Please start the following procedure within the next 20 seconds.

For Vehicle manufactured in Japan: Simultaneously hold the LOCK and UNLOCK buttons on the remote for 1-1.5 seconds and then release.

For Vehicles not manufactured Japan: Press the LOCK button on the remote for a minimum of 1 second and then release.

  • Within 3 seconds press the lock button for 1 second and then release.
  • System should lock and unlock once.

To Program an additional remote and remove all other remotes programmed.

  • Insert Key in the ignition switch and wait 2 seconds
  • Switch ignition on for 2 seconds and then turn off.
  • Switch ignition on for 2 seconds and then turn off.
  • Remove key
  • System should lock and unlock twice.

Note: Please start the following procedure within the next 20 seconds.

For Vehicles manufactured in Japan: Simultaneously hold the LOCK and UNLOCK buttons on the remote for 1-1.5 seconds and then release.

For Vehicles not manufactured in Japan: Press the LOCK button on the remote for a minimum of 1 second and then release.

  • Within 3 seconds press the lock button for 1 second and then release.
  • System should lock and unlock once.
  • If system locks and unlocks twice then the procedure has not been completed.
  • To Exit Programming mode open driver’s door

 

About Toyota Land Cruiser Amazon

The 100 series formed the basis for the Lexus LX 470, which was also sold in Japan as the Toyota Cygnus.

The 100 series was called the Toyota Land Cruiser Amazon in the UK and Ireland from 1998 to 2007.

In 2000, Toyota celebrated the 50th anniversary of the Land Cruiser with commemorative models offered in several countries. Total global production to date was 3.72 million vehicles.

The 100 series remained in production until late 2007, with several minor facelifts such as headlights, taillights, front grille, rear spoiler and specification changes introduced over the years. (Source Wiki)

Leave a Reply

Your email address will not be published. Required fields are marked *