KeyFob RKE Programming Procedure-Toyota Corolla Verso

KeyFob RKE Programming Procedure: Toyota Corolla Verso

Toyota Corolla Verso KeyFob Remote Keyless Entry Programming Procedure

 

 

How to Program Toyota Corolla Verso KeyFob Remote Keyless Entry

 

 

Key Fob Programming Procedure (Remote)

Remote programming is a manual process for all vehicles supported.
Please follow the procedures set out below to ensure accurate programming of the remotes.

 

Please ensure the following has been carried out before starting:

All Doors are closed
Start the vehicle and then stop the vehicle.
Remove key from the ignition switch.
Open the Drivers door and ensure it is unlocked.

  • Insert key in the ignition for 2 seconds and then remove.
  • Within 40 seconds: Close the driver’s door for 2 seconds and then open.
  • Wait 2 seconds: Close the driver’s door for 2 seconds and then open
  • Insert key in the ignition for 2 seconds and then remove.
  • Within 40 seconds: Close the driver’s door for 2 seconds and then open
  • Wait 2 seconds: Close the driver’s door for 2 seconds and then open
  • Close Drivers Door.

To Program an additional remote whilst retaining all other remotes programmed.

  • Insert Key in the ignition switch and wait 2 seconds
  • Switch ignition on for 2 seconds and then turn off.
  • Remove key
  • System should lock and unlock once.

Note: Please start the following procedure within the next 20 seconds.

For Vehicle manufactured in Japan: Simultaneously hold the LOCK and UNLOCK buttons on the remote for 1-1.5 seconds and then release.

For Vehicles not manufactured Japan: Press the LOCK button on the remote for a minimum of 1 second and then release.

  • Within 3 seconds press the lock button for 1 second and then release.
  • System should lock and unlock once.

To Program an additional remote and remove all other remotes programmed.

  • Insert Key in the ignition switch and wait 2 seconds
  • Switch ignition on for 2 seconds and then turn off.
  • Switch ignition on for 2 seconds and then turn off.
  • Remove key
  • System should lock and unlock twice.

Note: Please start the following procedure within the next 20 seconds.

For Vehicles manufactured in Japan: Simultaneously hold the LOCK and UNLOCK buttons on the remote for 1-1.5 seconds and then release.

For Vehicles not manufactured in Japan: Press the LOCK button on the remote for a minimum of 1 second and then release.

  • Within 3 seconds press the lock button for 1 second and then release.
  • System should lock and unlock once.
  • If system locks and unlocks twice then the procedure has not been completed.
  • To Exit Programming mode open driver’s door

 

 

About Toyota Corolla Verso

A compact MPV named the Corolla Verso has also been released in European markets. Its Japanese counterpart is the Corolla Spacio, which has been discontinued as of the tenth generation. The Corolla Rumion is also sold in the US market as the Scion xB.

The Corolla Matrix, better known just as the Matrix, shares the E120 and E140 platforms, and is considered the hatchback/sport wagon counterpart of the North American Corolla sedan, as the European/Australasian Corolla hatchback is not sold there. Toyota frequently combines the sales figures of the Corolla sedan and Matrix. The Pontiac Vibe, which is the General Motors badged version of the Matrix, shares the Corolla platform. The Vibe was exported from Fremont, California, to the Japanese market where it was sold as the Toyota Voltz. (Source Wiki)

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *