KeyFob RKE Programming Procedure-Toyota Avensis

KeyFob RKE Programming Procedure: Toyota Avensis

Toyota Avensis KeyFob Remote Keyless Entry Programming Procedure

 

 

How to Program Toyota Avensis KeyFob Remote Keyless Entry

Key Fob Programming Procedure (Remote)

Remote programming is a manual process for all vehicles supported.
Please follow the procedures set out below to ensure accurate programming of the remotes.

Please ensure the following has been carried out before starting:

All Doors are closed
Start the vehicle and then stop the vehicle.
Remove key from the ignition switch.
Open the Drivers door and ensure it is unlocked.

  • Insert key in the ignition for 2 seconds and then remove.
  • Within 40 seconds: Close the driver’s door for 2 seconds and then open.
  • Wait 2 seconds: Close the driver’s door for 2 seconds and then open
  • Insert key in the ignition for 2 seconds and then remove.
  • Within 40 seconds: Close the driver’s door for 2 seconds and then open
  • Wait 2 seconds: Close the driver’s door for 2 seconds and then open
  • Close Drivers Door.

To Program an additional remote whilst retaining all other remotes programmed.

  • Insert Key in the ignition switch and wait 2 seconds
  • Switch ignition on for 2 seconds and then turn off.
  • Remove key
  • System should lock and unlock once.

Note: Please start the following procedure within the next 20 seconds.

For Vehicle manufactured in Japan: Simultaneously hold the LOCK and UNLOCK buttons on the remote for 1-1.5 seconds and then release.

For Vehicles not manufactured Japan: Press the LOCK button on the remote for a minimum of 1 second and then release.

  • Within 3 seconds press the lock button for 1 second and then release.
  • System should lock and unlock once.

To Program an additional remote and remove all other remotes programmed.

  • Insert Key in the ignition switch and wait 2 seconds
  • Switch ignition on for 2 seconds and then turn off.
  • Switch ignition on for 2 seconds and then turn off.
  • Remove key
  • System should lock and unlock twice.

Note: Please start the following procedure within the next 20 seconds.

For Vehicles manufactured in Japan: Simultaneously hold the LOCK and UNLOCK buttons on the remote for 1-1.5 seconds and then release.

For Vehicles not manufactured in Japan: Press the LOCK button on the remote for a minimum of 1 second and then release.

  • Within 3 seconds press the lock button for 1 second and then release.
  • System should lock and unlock once.
  • If system locks and unlocks twice then the procedure has not been completed.
  • To Exit Programming mode open driver‟s door

 

 

About Toyota Avensis

The third generation Avensis was revealed at the 2008 Paris Motor Show. It went on sale in January 2009. Like the previous model, it is built at Toyota’s Burnaston plant in Derbyshire, England. This generation is available in sedan or station wagon styles only.[8]

Toyota ED2 initially designed the Avensis giving it a more sleek and athletic stance. It has a drag coefficient of Cd=0.28 for the sedan and Cd=0.29 for the wagon body. Other design goals were to create the most comfortable suspension in its class while still offering sporty handling. The Avensis continued to use front MacPherson struts and rear double wishbones. Unlike the previous generation Avensis models, there is no five door hatchback body style in this lineup, in favour of sedan and wagon body styles. (Source Wiki)

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *