KeyFob RKE Programming Procedure: Renault Extra 1995-2002

Renault Extra 1995-2002 KeyFob Remote Keyless Entry Programming Procedure

How to Program Renault Extra KeyFob Remote Keyless Entry for the year 1995-2002

Programming Procedure

Note. If the central locking / alarm system is malfunctioning or a replacement key fob is obtained. The following programming procedure is required to be carried out before the key fob will operate correctly.

Renault key fobs are usually fitted with a serial number which is located under the cover inside the key fob and can be viewed after removing fixing screw.

Note. Only key fobs fitted with an 8 character serial number can be programmed manually. Key fobs with a 5 character serial number – do not require programming. All other variations on the number of characters used for the serial numbers require diagnostic equipment to program the key fobs.

• Ensure the ignition switch is “OFF”
• Press and hold in the central locking button inside the vehicle for a minimum of 5 seconds
• Vehicle doors should “Lock” and then “Unlock”
• Within the next 10 to 15 seconds:
  • On the first key fob: Press the “Lock / Unlock” button twice (can be once on some
    models)

• • On the second key fob: Press the “Lock / Unlock” button twice (can be once on some models)
• Vehicle doors should “Lock” and then “Unlock”
• Key fobs are re-programmed.
• Confirm operation of key fob by locking and unlocking vehicle using key fob buttons.

About Renault Extra

The Renault Express is a panel van of the French automobile manufacturer Renault, which in July 1985 succeeded the R4 F6, and was placed on the market. It was based on the second generation Renault 5.

It was commercialised in some European countries as the Renault Extra (United Kingdom and Ireland), Renault Rapid (mainly German-speaking countries) or Renault Express (in France, Spain, Austria, Switzerland, Italy, Japan, Taiwan). From 1996 to 2002, the Express was produced for South America at Nordex in Uruguay. (Source Wiki)