KeyFob RKE Programming Procedure-Peugeot 807 2000

KeyFob RKE Programming Procedure: Peugeot 807 2000

Peugeot 807 KeyFob Remote Keyless Entry Programming Procedure

 

How to Program Peugeot 807 KeyFob Remote Keyless Entry for the year 2000

Re-initializing Procedure

Note. If battery is replaced inside key fob or if key fob buttons are operated repeatedly whilst vehicle is out of range and central locking / alarm system becomes inoperative, carry out the following reinitializing procedure.

  • Switch the ignition to the “ON” position using the key fob to be programmed
  • Press and release the “Lock button” on the key fob

 

KeyFob RKE Programming Procedure: Peugeot 807 2000

 

  • Switch the ignition to the “OFF” position
  • Key fob is re-initialized
  • Repeat above procedure to re-initialize any remaining key fobs.
  • Confirm operation of key fob by locking and unlocking vehicle using key fob buttons.

 

About Peugeot 807

The first generation Eurovans were marketed as the Citroën Evasion (Citroen Synergie in the UK), Fiat Ulysse, Lancia Zeta and Peugeot 806. The second generation models were all renamed, except the Fiat Ulysse, with the nameplates now Citroën C8, Lancia Phedra and Peugeot 807.

The first generation Eurovans were introduced in June 1994. They are smaller than American vans, like the Chrysler Voyager, which is also available in Europe. In contrast to the Toyota Previa, and like American minivans, they had sliding rear side doors, a trait they share with their commercial siblings. While the Voyager also came in “Grand” versions with elongated body and wheelbase (and the Espace followed suit in 1997), the Eurovans only came in one size.

The Eurovans were almost identical, the differences consisting in different grilles, lower tailgates/taillights, wheel covers/alloy wheels and exterior and interior badging, as well as different trim levels. In October 1998, the Eurovans were mildly facelifted.

Inside, the gear lever was mounted on the dashboard rather than on the floor, and the handbrake is on the door side of the driver’s seat, which allowed for the removal of middle console and opened up a passage between the front seats. The seating configurations included two fixed seats (swivelling on some models) in front and three individual removable seats in the middle row, along with optional two individual removable seats or a three seater bench in the third row. (Source Wiki)

 

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *