KeyFob RKE Programming Procedure-Mitsubishi Space Wagon 1995-2003

KeyFob RKE Programming Procedure: Mitsubishi Space Wagon 1995-2003

Mitsubishi Space Wagon 1995-2003 KeyFob Remote Keyless Entry Programming Procedure

 

 

How to Program Mitsubishi Space Wagon KeyFob Remote Keyless Entry for the year 1995, 1999 and 2003.

 

 

Key Fob Programming Procedure (Remote)

 

Programming Procedure

Note. If the central locking / alarm system is malfunctioning or a replacement key fob is obtained. The following programming procedure is required to be carried out before the key fob will operate correctly. Maximum of 2 Remotes can be programmed

  • Connect a link wire between Pin 4 and Pin 1 on the J1962 Connector
  • Close all Doors
  • Turn Ignition to ACC position and the back to Off 3 Times with in 10 Seconds
  • Doors Should lock then unlock
  • Press remote control lock or Unlock button once
  • Press remote control lock or Unlock button twice within 10 Seconds
  • Doors Should lock then unlock
  • Repeat for Second Remote

 

KeyFob RKE Programming Procedure: Mitsubishi Space Wagon 1995-2003

 

About Mitsubishi Space Wagon

Internationally, the MPV has been marketed as the Mitsubishi Space Wagon, Mitsubishi Nimbus and Mitsubishi Expo — and as the Dodge and Plymouth Colt Vista Wagon, as captive imports in North America, and as the Eagle Vista Wagon in Canada. It has also been manufactured under license as the Hyundai Santamo and Mitsubishi Savrin in Asia.

The first generation Chariot (D0#W-series) was produced from February 1983 to May 1991 with a choice of SOHC straight-four powerplants ranging from the 1.6-liter 4G32 to the 2.0-liter 4G63 petrol engines, or the 1.8 liter 4D65T turbodiesel (from October 1984), mated to a five-speed manual or three-speed automatic transmission.[5] It occupied the market segment previously served by the Mitsubishi Galant station wagon. (Source Wiki)

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *