KeyFob RKE Programming Procedure: Mitsubishi Evo 2000-2002

Mitsubishi Evo 2000-2002 KeyFob Remote Keyless Entry Programming Procedure

 

 

How to Program Mitsubishi Evo KeyFob Remote Keyless Entry for the year 2000 and 2002

 

Key Fob Programming Procedure (Remote)

Programming Procedure

Note. If the central locking / alarm system is malfunctioning or a replacement key fob is obtained. The following programming procedure is required to be carried out before the key fob will operate correctly. Maximum of 2 Remotes can be programmed

 

  • Connect a link wire between Pin 4 and Pin 1 on the J1962 Connector
  • Close all Doors
  • Turn Ignition to ACC position and the back to Off 3 Times with in 10 Seconds
  • Doors Should lock then unlock
  • Press remote control lock or Unlock button once
  • Press remote control lock or Unlock button twice within 10 Seconds
  • Doors Should lock then unlock
  • Repeat for Second Remote

 

KeyFob RKE Programming Procedure: Mitsubishi Evo 2000-2002

 

 

About Mitsubishi Evo

The introduction of the Evolution VII also marked the first time an automatic drivetrain was included within the model lineup—the GT-A. Nicknamed the ‘grand theft auto’ version of the visually similar VII GSR and the RS2, the GT-A model was only produced in 2002 and had the following distinguishing interior and exterior specification: GT-A-only diamond cut finish 17-inch (431.8 mm) alloy wheels, clear rear light lenses and all-in-one style front headlights (later used on the Evolution VIII).

The GT-A had the option of either no spoiler, the short spoiler (as per the Lancer Cedia; and later used on the Evolution VIII 260) or the thunder spoiler as used on the standard Evolution VII models. The most distinguishing feature was a smooth bonnet with no air-grills on it at all and the revised front bumper. Although offering inferior cooling capabilities, the bonnet was designed to give a cleaner line through the air with less air resistance at motorway speeds. (Source Wiki)

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *