KeyFob RKE Programming Procedure: Ford Mondeo 2001

Ford Mondeo 2001 KeyFob Remote Keyless Entry Programming Procedure
Programming Procedure
Note. If the central locking / alarm system is malfunctioning or a replacement key fob is obtained. The following programming procedure is required to be carried out before the key fob will operate correctly.
- Close all doors
- Switch the ignition “ON” 4 times within 6 seconds
- Switch the ignition “OFF”
- Programming mode activated for approximately 10 seconds:
- Press and release any button on the key fob
- An audible warning will sound and the system Alarm LED will flash to indicate successful programming
- After the first key has been programmed, the 10 seconds programming mode automatically starts again for the next key
- Repeat above procedure to re-program any remaining key fobs.
- To exit programming mode: Switch ignition “ON” or wait 10 seconds
- Confirm operation of key fobs by locking and unlocking vehicle using key fob buttons.
Note. A maximum of 4 key fobs can be programmed to the vehicle.
About Ford Mondeo
In 2000, the team expanded from two cars to three when drivers Alain Menu and Anthony Reid were joined by 1998 series champion Rickard Rydell, recruited from the disbanded Volvo team. The team dominated the season of 2000, finishing 1–2–3 (Menu–Reid–Rydell) in the drivers’ standings and winning the manufacturers’ championship by 104 points.
A complete overhaul of the BTCC following the season of 2000 had the Super Touring regulations scrapped as the series moved towards less expensive, but slower race cars. Ford withdrew from BTCC competition prior to 2001.
The touring cars, after their withdrawal, went on sale to the public and are now in the hands of other drivers. Two of the 2000 series Mondeos have been spotted in the BRSCC series of LMA Euro saloons; drivers known to own them at present are Bernard Hogarth and Alvin Powell. (Source Wiki)