KeyFob RKE Programming Procedure: Ford Galaxy 1995-2006

Ford Galaxy 1995-2006 KeyFob Remote Keyless Entry Programming Procedure

 

Programming Procedure – Infrared key fobs

Note. If the central locking / alarm system is malfunctioning or a replacement battery is installed or key fob is obtained. The following programming procedure is required to be carried out before the key fob will operate correctly.

  • Close all windows and doors
  • Insert one of the keys into the driver‟s side door lock
  • Within 5 seconds: Turn key to “Unlock” position 3 times

Note. Insure key is held in “Unlock” position for at least 0.5 seconds.

Remove key from driver’s side door lock

  • Programming mode activated with driver‟s door LED illuminated
  • Carry out the following within 15 seconds:
    o Point key fob at infrared receiver (located near rear view mirror)
    o Press and hold the “Lock” button on the key fob within 5 seconds of entering programming mode

KeyFob RKE Programming Procedure: Ford Galaxy 1995-2006

Typical 2-button key fob 

o Press the “Unlock” button 3 times on the key fob
o Release the “Lock” button on the key fob
o Correct programming of key fob indicated by driver‟s door LED flashing 6 times and key fob LED flashing 5 times
o Repeat above procedure within 15 seconds to re-program any remaining key fobs.
o To exit programming mode and turn “OFF” driver‟s side door LED: wait 15 seconds without pressing any key fob buttons.28
o Confirm operation of key fobs by locking and unlocking vehicle using key fob buttons.

 

Note. A maximum of 4 key fobs can be programmed to the vehicle.

 

Programming Procedure – Radio frequency key fobs

Note. If the central locking / alarm system is malfunctioning or a replacement battery is installed or key fob is obtained. The following programming procedure is required to be carried out before the key fob will operate correctly.

  • Close all windows and doors
  • Insert one of the keys into the driver‟s side door lock
  • Within 5 seconds: Turn key to “Unlock” position 3 times

Note. Insure key is held in “Unlock” position for at least 0.5 seconds.

Remove key from driver’s side door lock

  • Programming mode activated with driver’s door LED illuminated
  • Carry out the following within 15 seconds:
    o Press and hold the “Lock” button on the key fob within 5 seconds of entering programming mode

 

 

o Press the “Unlock” button 3 times on the key fob
o Release the “Lock” button on the key fob
o Correct programming of key fob indicated by driver‟s door LED flashing 6 times and key fob LED flashing 5 times
o Repeat above procedure within 15 seconds to re-program any remaining key fobs.
o To exit programming mode and turn “OFF” driver‟s side door LED: wait 15 seconds without pressing any key fob buttons.
o Confirm operation of key fobs by locking and unlocking vehicle using key fob buttons.

Note. A maximum of 4 key fobs can be programmed to the vehicle

 

 

About Ford Galaxy

The second generation Galaxy was introduced at the 2006 Geneva Motor Show, and went on sale alongside the Ford S-Max (which had a lower rear roofline, external cosmetic differences and only child seats in the third row) in June 2006.

The new Galaxy is larger than its predecessor, and is a four pillar vehicle of Ford design, with no Volkswagen Group content (Ford sold its stake in AutoEuropa back to the Volkswagen Group the year before). No longer produced at the AutoEuropa plant in Portugal, Europe’s replacement Galaxy is assembled at a newly re equipped plant alongside the Mondeo in Genk, Belgium. With the S-Max catering to customers who require a sport-oriented multi-purpose vehicle (MPV), Ford was able to expand the Galaxy in every dimension without losing sales in size conscious Europe. (Source Wiki)

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *