Key Programming Toyota Yaris 2009-2010

Toyota Yaris 2009-2010 Key Programming Procedure

 

The following are the key programming procedures for the year 2007, 2008, 2009 and 2010 Toyota Yaris.

 

Toyota Yaris 1998-2001

TO DELETE ALL BUT ONE KEY FROM THE UNIT:

1. Depress and release brake and accelerator pedals once, doing both at the same time.
2. Put an existing master key into the ignition. Leave the key in the LOCK position; do not turn it.
3. Press and release the accelerator pedal, six times, within 15 seconds of inserting the key.
4. Within 20 seconds of Step 3, press and release the brake pedal seven times.
5. The dashboard security light will flash. This confirms that all keys (except the one currently being used) have been deleted.
6. Within ten seconds, remove the key from the ignition cylinder. This is now the only key still programmed to work.

ADD KEY:

1. Press and release the brake and accelerator pedals once, doing both at the same time.
2. Put the existing master key into the ignition.
3. Press and release the accelerator pedal five times within 15 seconds.
4. Press and release the brake pedal six times within 20 seconds and remove key.
5. Insert new key into ignition within ten seconds.
6. Press and release the accelerator pedal once within ten seconds.
7. The security light will turn off after 80 seconds. This indicates that the new key is now registered.
8. Remove new key. Press and release the brake pedal once.

 

Toyota Yaris 2002-2010

Keys can be programmed using the Code-Seeker on most 32 bit systems.

TO DELETE ALL BUT ONE KEY FROM THE UNIT:

1. Simultaneously depress and release brake and accelerator pedals 1 time.
2. Insert an existing master key into the ignition cylinder. Do not turn the key from the OFF(LOCK) position.
3. Within fifteen seconds of inserting the key, depress and release the accelerator pedal six times.
4. Within twenty seconds of completing the above step, depress and release the brake seven times.
5. The security light will flash, indicating all keys other than the one being used have been deleted.
6. Remove the key from the ignition cylinder within ten seconds. It will be the only key still programmed to work.

 

ADD DUPLICATE KEY:

Requires one working Toyota/Lexus Master key.

1. Make sure all doors and windows are closed.
2. Insert Master key into the ignition cylinder.
3. Cycle the ignition cylinder from ON to OFF five times.
4. Open and close the driver side door six times.
5. Remove the Master key and insert the new duplicate key.
6. TURN THE IGNITION CYLINDER ON.
7. The new key will be registered after 60 seconds. The THEFT light on the dashboard will go out, indicating that the programming has been completed.

 

About Toyota Yaris

In the United States, beginning with 2012 models debuted in late 2011, only the XP130 Yaris Liftback was sold; the XP150 sedan was not offered. Toyota concurrently discontinued the Yaris sedan in Canada due to the XP90 sedan’s low sales.

Toyota Motor Manufacturing France began producing all XP130 Yaris models in the United States and Canada in May 2013.
Toyota did not introduce the 2019 model year XP130 Yaris Liftback in the United States; the 2018 model was sold until January 2019, when it was retired.
The 2019 model was sold in Canada until 2020, when it was replaced by the Mazda2-based Yaris.

In Latin America and the Caribbean, the Vios XP150 series was debuted in 2013 as the Yaris Sedan.

In early 2018, these markets saw the introduction of a version of the Thai-market Yaris ATIV, dubbed the Yaris Sedan. Until 2020, it was offered in Mexico alongside the more expensive Mazda2-based Yaris R.

Leave a Reply

Your email address will not be published. Required fields are marked *