ACURA TLX 2020-2023 Wheel Alignment Specifications
Acura TLX Wheel Alignment Specifications for 2020-2023 year model
Acura TLX Wheel Alignment Specifications for 2020, 2021, 2022, 2023 year model. The Acura TLX wheel alignment includes specifications in both millimeters (mm) and degrees. Here are the specifications in table format.
Table 1: Alignment Specifications in degrees (°)
Table 2: Alignment Specifications in Millimeters (mm)
Wheel Alignment Parameters
1. Camber: Camber is the angle of the wheels when viewed from the front or rear of the vehicle. A wheel that is tilted inward has negative camber, while a wheel that is tilted outward has positive camber. Camber can affect tire wear, handling, and steering.
2. Caster: Caster is the angle of the steering axis when viewed from the side of the vehicle. A positive caster angle means that the steering axis tilts towards the rear of the vehicle, while a negative caster angle tilts towards the front. Caster can affect steering stability and the returnability of the steering wheel to center.
3. Toe: Toe refers to the angle at which the front or rear wheels are tilted inward or outward when viewed from above. If the wheels are tilted inward, this is called “toe in,” while if the wheels are tilted outward, this is called “toe out.” Toe can affect tire wear, handling, and steering.
4. Thrust Angle: The thrust angle is the angle between the vehicle’s centerline and the rear axle’s geometric centerline. It is measured by comparing the direction that the rear wheels are pointing to the centerline of the vehicle. The thrust angle can affect vehicle stability and how straight the vehicle drives. A thrust angle that is not perpendicular to the centerline of the vehicle can cause the vehicle to pull to one side.
* Please note that these specifications are for general guidance only, and the specific alignment settings for a particular vehicle may differ depending on factors such as driving conditions and personal preference. It’s always best to consult a professional mechanic or alignment specialist for the most accurate recommendations for your vehicle.
Wheel Alignment Brief Information
Wheel alignment is the process of adjusting the angles of the wheels so that they are perpendicular to the ground and parallel to each other. Proper wheel alignment is important for several reasons, including:
1. Safety: Properly aligned wheels help ensure that a vehicle travels in a straight line and handles properly, reducing the risk of accidents.
2. Tire Wear: Misaligned wheels can cause uneven tire wear, reducing tire life and requiring more frequent replacements.
3. Fuel Efficiency: When wheels are misaligned, the vehicle may have to work harder to maintain speed, which can result in decreased fuel efficiency and increased costs.
4. Ride Comfort: Properly aligned wheels can result in a smoother ride and better handling, improving overall ride comfort.
About Acura TLX
Since 2014, Acura, a luxury division of Honda, has sold the Acura TLX, a four-door entry-level luxury sedan. It is the replacement for both the TL and TSX models. The RLX will be discontinued in 2021, leaving the TLX as Acura’s flagship sedan. The Acura TLX debuted as the “TLX Prototype,” a sedan designed in Acura’s Los Angeles Design Studio to replace the TL and TSX sedans. The production model was unveiled at the 2014 New York International Auto Show in April. Sales began in August, and the TLX began production in July in Marysville, Ohio, USA.
The second generation TLX debuted digitally on May 28, 2020, based on the design of the Type S concept introduced in 2019. Production began on August 28, with sales beginning on September 28. A Type S model equipped with a new turbocharged 3.0-liter DOHC V6 engine producing 355 horsepower (265 kW; 360 PS) and 354 lbft (480 Nm; 49 kgm). torque, up from 272 horsepower (203 kW; 276 PS) and 280 lbft (380 Nm; 39 kgm) in the A-Spec. This is the variant’s return after a decade-long absence, and it will go on sale in showrooms on June 23, 2021. (Source: Wiki)
